Results 21 to 26 of 26
-
12th November 2014, 12:00 AM #21
You tried restore to factory settings ( in menu ) ?
-
12th November 2014, 05:34 PM #22
Restore yes. This is old device (navcore by tthome 8.544, myself try 9.057). Gps fix was also instaled before. Now device stuck o START logo. VEry strange device. Seems it has HW fault.
-
13th November 2014, 02:50 AM #23
-
13th November 2014, 03:38 PM #24
Save this code under UNIX format (use ConTEXT or notepad++) copy the file to the root of the tomtom by naming "ttn" (no extension).
Properly disconnect the tomtom
The reboot by holding down power button stop. The ttn file erases only after you reset the memory BAT.
The track will be at the root of the tomtom file clearMTD.log
Restart the tomtom not connected (press ++ 20s on button -> sound of tamtam)
it should then start the reboot alone and reapply the settings until the time
and it blocks not what is earned.
------------------------------------------------------------------------------------------
#! /bin/sh
#
# reformate et restaure flash MTD bloquee en lecture seule
# copier à la racine de la carte SD sous "ttn"
mount_flash() {
# reinitialise flash ( extrait de /etc/rc )
flashdir=$1
flash_dev=$2
flash_opts=$3
echo "WARNING: ${flashdir} seems to be corrupt, reinitializing..."
if ! umount ${flashdir}; then
echo "WARNING: Unmounting ${flashdir} failed!"
return 1
fi
if ! flash_erase /dev/${flash_dev} 0x40000 0x40000; then
echo "WARNING: Erasing ${flashdir} failed!"
return 1
fi
if ! mount -n -t ngffs ${flash_dev} ${flashdir}; then
echo "WARNING: Mounting ${flash_dev} on ${flashdir} failed again!"
return 1
fi
echo "Successfully reinitalized ${flashdir}."
return 0
}
# **************************** main *******************************
touch /mnt/sdcard/usecmdlog.dat
echo "# clearMTD ..." > /mnt/sdcard/clearMTD.log
# reinitialise flash et recopie contenu
echo -e "\n# mount_flash" >> /mnt/sdcard/clearMTD.log
if mount_flash /mnt/flash mtd0 rw,sync,noatime,nosuid,nodev ; then
echo -e "\n# umount /mnt/flash" >> /mnt/sdcard/clearMTD.log
umount /mnt/flash
fi
rm -f /mnt/sdcard/usecmdlog.dat
rm -f /mnt/sdcard/ttn
echo -e "\n# clearMTD --> reboot" >> /mnt/sdcard/clearMTD.log
/sbin/reboot
-
13th November 2014, 03:42 PM #25
Work with my tomtom one iq route
-
13th November 2014, 03:53 PM #26
This is not a navcore problem but a problem with your map.
First check if there is a mapsettings.cfg file in your cardmap. (See post #23, pe1agp)
If so, delete it.
If this doesn't work go back to factorysettings (post #21, basflt)
If that also doesn't work, your map is probebly incomplete/corrupt. Try downloading one from another source
Similar Threads
-
Problems downloading a map & extracting it...
By gitf@ce in forum TomTom ArchiveReplies: 3Last Post: 11th February 2012, 07:48 PM -
Voice problem with XL
By xanthic in forum TomTom NavcoresReplies: 14Last Post: 14th January 2012, 07:45 PM -
Problem with fast activate premium
By iainskye in forum TomTom Open Tools & TweaksReplies: 6Last Post: 8th January 2012, 04:46 AM -
Problem while updating TOMTOM OVE v4
By Ektoplasm in forum TomTom ArchiveReplies: 3Last Post: 31st December 2011, 04:27 PM
Hungarian speedcams + traafic...
Navi alias cserrobi from Hungary! I answer: Uj...