Results 21 to 29 of 29
-
9th August 2018, 01:57 AM #21
Sorry, my post was moved to this thread so I didn't get notification. Now I've actually had 2 of these Ones, and one (no pun intended) died. That dead one had a noticable brighter screen though, so I took the best parts and put them together. So actually I'm not sure if the serial on my case is the 'real' one, but I'm pretty sure both were TomTom One IQ routes. Serial starts with PS, TomTom site states 'Your device is a TomTom ONE IQ Routes with 2GB memory and it updates through TomTom HOME'. Not sure what picture you'd like to see. I put in a 8GB card as you can see:
And it's running the 1010 Europe map, which is shy over 2GB in size, but that never would've fit on the internal memory. However, maybe the confusion is I called it V5, which it might not be
By the way, it turns out it has bootloader 5.5136, I was damn sure it was 5.5128. My memory is starting to fail me already... oh well...
About the XL board:
I had to make a picture with my cellphone, my good cam has a flat battery at the moment. This is the board WR6_V1.4. I hope the pics are clear enough, the contacts / traces are the same as on board V1.3. Still not working though.
-
The Following 1 Users Say Thank You to Rataplan626 For This Useful Post:
- [ Click To Expand ]
-
moki71 (21st April 2024)
-
19th December 2018, 03:07 AM #22
Update: Today I removed the internal memory chip of the XL mentioned in the previous post. After removing the internal memory, the SD card is recognized perfectly fine. Seems it's unable to handle two memory chips at the same time. I used these solder points on my 1.4 board and as said after removing internal memory chip, it works fine!
-
The Following 4 Users Say Thank You to Rataplan626 For This Useful Post:
- [ Click To Expand ]
-
-
19th December 2018, 04:09 AM #23
Well done. Normally these pre x20's like your XL (that has internal memory AND an SD card slot) could only ever run off either the SD card (if inserted prior to boot-up) OR internal memory if no card is present and you never could run them both together as you can on the newer units where you could add just new map (folders) to an SD card then "Manage Maps/Switch Maps"
SPAM HUNTER/KILLER
Please do not just post "thanks" but use the "thanks" button bottom/right or the reputation star "*" bottom/leftS i m p l e s
-
15th March 2019, 05:13 PM #24
Can anyone tell me if the pictures in post #5 or post #21 also are correct for a TT XXL Classic serie TTS (serial number GQ)? If yes, which one is correct?
Or has someone a manual, pictures and a scheme for this device
I like to try to give it more memory than the internal 2 GB
PeterLast edited by PeterHimself; 15th March 2019 at 06:24 PM.
-
21st September 2019, 11:26 PM #25
Tomtom XL
I have a classic XL, I intend to remove the existing memory and wire in an SD card using the excellent photo diagram in Rataplan626 's Dec 2018 post. Rataplan seems to be using an 8GB card, has anyone tried anything larger? I have a few 16GB hanging about but nothing smaller, I'm itching to give it a go but dont want to do the job twice.
Bill.
-
22nd September 2019, 12:53 AM #26
16GB will be fine but 32's pushing your luck!
SPAM HUNTER/KILLER
Please do not just post "thanks" but use the "thanks" button bottom/right or the reputation star "*" bottom/leftS i m p l e s
-
The Following 1 Users Say Thank You to biggerdave For This Useful Post:
- [ Click To Expand ]
-
bilco (23rd September 2019)
-
23rd September 2019, 03:40 PM #27
Update- All done and working fine, just a few hiccups mainly due to the SMD not wanting to fall off using my sledgehammer tactics (a pyro pen and a good shake!). While its apart I would like to fix it so it will power on with the ignition switch rather than needing a button press. If this has been done before any advice or links would be appreciated, if not I have a few ideas that I'll try.
Bill.
-
18th February 2022, 04:07 AM #28
Anybody any ideas for the Rider 2013? It only has 4 GB internal memory, which is a bit small by now.
What's this area that looks like a SIM or SD card with two rows of 6 solder points?
Area with the SoC cover removed:
Last edited by treysis; 18th February 2022 at 04:11 AM.
-
The Following 3 Users Say Thank You to treysis For This Useful Post:
- [ Click To Expand ]
-
jungblume2005 (19th February 2022), moki71 (21st April 2024), Momatz (17th June 2022)
-
1st March 2022, 03:39 AM #29
Nobody any idea?
Similar Threads
-
Internal memory low. need update maps in SD card
By b22c in forum Garmin DiscussionsReplies: 2Last Post: 2nd February 2015, 10:44 PM -
Add europe map into GO 2535 WTE only internal memory
By veaceslav1982 in forum TomTom DiscussionsReplies: 2Last Post: 1st September 2014, 01:17 PM -
TomTom via Live, how to access internal memory
By eivl in forum TomTom DiscussionsReplies: 3Last Post: 24th July 2014, 08:45 PM -
go530 internal memory
By tomkindle in forum TomTom DiscussionsReplies: 12Last Post: 1st November 2013, 05:13 AM -
Extra POI Editor v.422
By Mobile_Guru in forum Garmin POI's & SpeedcamsReplies: 0Last Post: 6th March 2011, 03:17 PM
Blowfish/Meta codes for v1135...
; Europe_1135_12484 35 42 1D 38 86 4B 09 7F F9...