Results 11 to 20 of 21
-
10th March 2022, 11:57 PM #11
tomtom pro webflet patch works , but the problem is that can not active map on model: 7350 and 5350
i explane ...if you have a tomtom pro 7350 or a pro 5350 with normal europa map and you want to put europe truck map then the patch no works, can not activate maps , this is the problem .
i know that someone solved it but i don't know...maybe he can help you here .
you can change software/navcore from 17 to 21 ..i mean from tomtom pro webflet to nav5, but also normal nav5 patch con not activate maps , too
the problem is not on patch, but in this tomtom pro version, they are different !
different is on tomtom pro 7250 or 5250 ..they are nav4 and patch can works..sure, tested.
-
11th September 2022, 07:32 PM #12
corne64
I have TomTom Bridge locked in the same way, but this method doesn't work
I also can't update the maps, I know where to download them, but I need to reset my device to factory settings first.
corne64
I wrote to tomtom but they don't want to help (Bridgestone and Webfleet will take over telematics) and the manual is available on their website
I need the reset.img file
Factory reset device from recovery.
Factory reset from recovery is not normally possible in order to protect against end user factory resetting a device and rendering it unusable. There are cases where this can be helpful, however - for example when a screen lock has been set and forgotten. In these cases we can allow a factory reset from recovery. For this a special reset.img must be requested from the TomTom Bridge team. In order to factory reset a device from recovery:
List the MUIDs of the devices you would like to factory reset in a CSV file.
Contact the Bridge team and send them the file.
They will send you one or multiple reset.img images with instructions how to perform the factory reset.
Please be aware, these will always allow a factory reset from recovery so itÂ’s best to recover on a case by case basis.Last edited by biggerdave; 11th September 2022 at 08:03 PM. Reason: Please just add/edit; NOT make new post every time!
-
12th September 2022, 03:00 AM #13
i don't understand very well what help you want me to.
we are NAV4 section, as far as I are webfleet is Nav5? put data, first 2 -number letters and if you know that Navcore has.
your device is blocked, some more data, is nothing seen? start and conjust? etc...
ask recovery, if tomtom sends you to, Bridgestone and Webfleet I don't think it's good idea to install any recovery.
my webfleet information the first 2 begin; ZH and ZJ, within these first 2 letters it may be that it contains a map; europe or europeruck, but you can only use the version you bought and each new map version is installed in the same package with Navcore.
regards
PS.
nav5? webfleet ID: ZH and ZJ
na4? telematics ID: MA and MBLast edited by simba; 12th September 2022 at 02:38 PM. Reason: add data
-
The Following 1 Users Say Thank You to simba For This Useful Post:
- [ Click To Expand ]
-
biggerdave (12th September 2022)
-
12th September 2022, 09:51 PM #14
hello Simba
My device is the TomTom Bridge on Android 6
OJ batch no
it has the owner profile (wifi) blocked and I can't update the maps (from the card as well) so it's configured
I wrote to tomtom because I found this manual on their pages, but they don't want to help me
I am not a webfleet customer.
I need the file reset.img (disk image) to factory reset the device.
-
12th September 2022, 09:52 PM #15
Factory reset device from recovery.
Factory reset from recovery is not normally possible in order to protect against end user factory resetting a device and rendering it unusable. There are cases where this can be helpful, however - for example when a screen lock has been set and forgotten. In these cases we can allow a factory reset from recovery. For this a special reset.img must be requested from the TomTom Bridge team. In order to factory reset a device from recovery:
List the MUIDs of the devices you would like to factory reset in a CSV file.
Contact the Bridge team and send them the file.
They will send you one or multiple reset.img images with instructions how to perform the factory reset.
Please be aware, these will always allow a factory reset from recovery so it’s best to recover on a case by case basis.
-
12th September 2022, 11:03 PM #16
Is it just me or is this entire thread just going round in ever decreasing circles, getting nowhere and confusing the hell out of everyone involved (most of whom are just trying to help) WTF Bridge? Webfleet? Telematics?
SPAM HUNTER/KILLER
Please do not just post "thanks" but use the "thanks" button bottom/right or the reputation star "*" bottom/leftS i m p l e s
-
The Following 2 Users Say Thank You to biggerdave For This Useful Post:
- [ Click To Expand ]
-
-
13th September 2022, 03:21 AM #17
Bridge;
ican't help you, I don't know anything about this device, i imagine that it is on this website where you have looked, as you see there is a lot of variety, countries, example Europe or Europe Truck, etc ....
you would have to make sure what device you have before wanting to install any recovery.
example europe truck pack, rescue + recovery, etc...;
regards
-
The Following 1 Users Say Thank You to simba For This Useful Post:
- [ Click To Expand ]
-
biggerdave (13th September 2022)
-
13th September 2022, 04:24 AM #18
I used rescue.img disk image but this disk image does not remove the configuration lock
however, I cannot restore the device to factory settings
-
13th September 2022, 03:25 PM #19
Its look like you are not the first Owner of this Device and the Device is Protect by Password and Telematics Account is needed? Is thats
your Problem? The Support need your Device ID to send you the correct DL link for rescue Image?Last edited by Proukaet; 13th September 2022 at 03:58 PM.
-
13th September 2022, 03:58 PM #20
Proukaet
Yes, someone has set a configuration lock
I want to factory reset to update the maps
I am not using a telematics account
serial number OJ4197I00590
Tomtom Support refers me to Webfleet, but I am not their customer
Can you help me?
City Navigator Europe NT 2025.10...
New map requires 14 GB......... with GE & the...