Results 1 to 10 of 32
-
18th June 2019, 07:13 AM #1
Consequences of WNRO for GO x20, x30, 7000, x40, x50 and 9000 using a Navcore Truck 9.702 and known solutions
TomTom has released for all these models an update of the last navcore in force before April 6, 2019. The version has increased from 9.510 to 9.541, to correct the bug of WNRO. On the other hand, no update of the navcore Truck 9.702 has been proposed by TomTom, so that the problems of the GPS using this navcore have not been solved.
But fortunately, the saying "there are no problems, only solutions" is confirmed once more. Let's see what solutions have been found:
A) The clock problem.
B) The satellite problem.
Edit: Since August 21, 2019 a really effective solution has been found!
Edit: Since September 28, 2019, the firmware update for GO x20/x30/7000 is possible with any type of SD card!
Charlie62 Reviewed by Charlie62 on . Consequences of WNRO for GO x20, x30, 7000, x40, x50 and 9000 using a Navcore Truck 9.702 and known solutions TomTom has released for all these models an update of the last navcore in force before April 6, 2019. The version has increased from 9.510 to 9.541, to correct the bug of WNRO. On the other hand, no update of the navcore Truck 9.702 has been proposed by TomTom, so that the problems of the GPS using this navcore have not been solved. But fortunately, the saying "there are no problems, only solutions" is confirmed once more. Let's see what solutions have been found: A) The clock problem. Rating: 5Last edited by Charlie62; 27th February 2022 at 05:41 AM.
-
The Following 75 Users Say Thank You to Charlie62 For This Useful Post:
- [ Click To Expand ]
-
30Jose (28th August 2019), adrianm (8th December 2019), Alfred_ML (23rd August 2019), Andrzej_j40 (9th November 2021), antoniolurdes (25th July 2019), benci81 (24th January 2020), beraun (23rd August 2019), berkem (25th July 2019),
bernardomdez(27th September 2019), Bertje34 (23rd August 2019), Big123 (20th April 2024), biggerdave (19th June 2019), briciola31 (25th October 2019), Bubu (7th July 2019), caam14 (24th January 2020), caulonia (27th January 2020), CCCOMEYCALLA (8th July 2019), chickenlicker22 (17th July 2019), chilindrin (8th September 2019), craphacker (3rd October 2019), d0m4n (8th August 2019), dave7037 (3rd July 2019), driekes (24th May 2020), dziadek1 (10th August 2021), fifinios (18th June 2019), florinpur (31st August 2019), fullequipe (27th July 2019), gijs (30th August 2019), gomenuje (14th September 2019), harmjan_baltes (31st October 2019), hes388 (11th December 2019), ibocan4777 (4th November 2019), Jeanet (18th June 2019), jimbobc (18th June 2019), joke (13th November 2019), jose.freitas (5th July 2019), jungblume2005 (19th November 2021), kadaf (21st December 2019), kenshiro2 (11th March 2021), kraguj (31st October 2019), KurtCobain (31st August 2019), Lordlucon (28th April 2022), Maa1506 (22nd April 2020), mace10001 (30th November 2019), manifold (22nd September 2019), marky1991 (17th October 2019), menta (19th June 2019), meskis (30th July 2019), Michael6712 (20th January 2023), miguelseguranca (26th September 2019), moki71 (28th November 2019), Momatz (6th October 2019), Nando Rola (21st July 2019), neyko68 (25th December 2020),Obol(29th September 2019), onistimnotboris (22nd October 2019), Orni (26th September 2019), paco1967 (19th June 2019), pacoanaykiko (17th October 2019), paveu78 (1st September 2019), PeterHimself (19th June 2019), powermeta (18th August 2019), rrafalek (1st November 2023), sergioverona20 (17th August 2019), stuntdouble (25th June 2019), the Maverick (25th June 2019), Timbaland (25th February 2020), tohis (28th August 2019), treysis (21st September 2019), victorgonzalez (21st July 2019), vourchjean (3rd October 2021), Xius27 (31st August 2019), yopy (25th September 2019), zielony406 (31st March 2020), Zurumbatico (20th July 2019)
-
25th June 2019, 04:40 AM #2
Hi I used the preventitive measures and it worked, however when I go to "reset" it then crashes and then crashes on the start screen and wont go further than that.
Will this be a navcore or map problem?
Thanks for the help
-
The Following 1 Users Say Thank You to gleaveri For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019)
-
27th June 2019, 08:46 AM #3
What is your GPS model, what navcore and map are you using, etc. ? Without any information on your configuration it's impossible to help you!
-
The Following 3 Users Say Thank You to Charlie62 For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019), Momatz (6th October 2019), Motocarletto (5th August 2019)
-
25th July 2019, 04:09 PM #4
bom dia muito obrigado
Single post IN ENGLISH will suffice: "good morning thank you very much" but why not just click the "Thanks" box
-
The Following 1 Users Say Thank You to antoniolurdes For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019)
-
26th July 2019, 12:15 AM #5
@Charlie62,
B) The satellite problem it does not work. Thanks now works..Last edited by berkem; 26th July 2019 at 12:23 AM.
-
The Following 2 Users Say Thank You to berkem For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019), Charlie62 (27th July 2019)
-
13th August 2019, 12:37 AM #6
only 5 day work gps model go 930
-
The Following 1 Users Say Thank You to miszcz1977 For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019)
-
13th August 2019, 02:24 PM #7
-
The Following 1 Users Say Thank You to rusigor For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019)
-
13th August 2019, 02:51 PM #8
Or use an alternative (paperclip, suicide.dat) if you are at the end of the World without internet connection...
In this case, your Go930 will even work with a completely empty ephem folder!
-
The Following 4 Users Say Thank You to Alfred_ML For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019), Momatz (6th October 2019), Nando Rola (18th November 2019), pe1agp (13th August 2019)
-
23rd August 2019, 01:06 PM #9
Since 21.08.2019 there is the ultimate solution to fix the satellite problem of the x20/30/7000: Flashing the existing GPS firmware GSW3.2.4 to GSW3.2.5. Please read the posting # 1 / B point 3.
Not only interesting for users of the Truck-NC 9.702, all older NC 9.xxx (like Rider or 9.501) are running after flashing the GPS firmware without problems.Last edited by Alfred_ML; 23rd August 2019 at 01:13 PM.
-
The Following 4 Users Say Thank You to Alfred_ML For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019), Momatz (6th October 2019), Nando Rola (18th November 2019), yopy (25th September 2019)
-
23rd August 2019, 04:47 PM #10
Indeed, the firmware update from 3.2.4 to 3.2.5 solves the satellite problem with ALL navcores. I did exhaustive tests on a GO 720 and a GO 730 with the following official navcores (no modification and empty "ephem" folder): 9.510, 9.541, 9.701 and 9.702. There is no longer any problem with satellites. It's even possible to completely delete the "ephem" folder! After flashing, the x20/x30/7000 behave exactly like the x40/x50/9000.
N. B. With the 9.541 the x20/x30/7000 that still have the 3.2.4 firmware have anyway no problem, because it's the only official navcore (except the 8.843 for Carminat TomTom) that solves the satellite problem.Last edited by Charlie62; 30th September 2019 at 04:53 AM.
-
The Following 10 Users Say Thank You to Charlie62 For This Useful Post:
- [ Click To Expand ]
-
biggerdave (30th August 2019), briciola31 (25th October 2019), Calamar_Gigante (1st January 2020), funkoligy (30th September 2019), joke (13th November 2019), livvy (24th September 2019), miszcz1977 (31st August 2019), Momatz (6th October 2019), Nando Rola (18th November 2019), pe1agp (23rd August 2019)
SMD - TomTom 2024.09 SYGIC 23 #...
SMD - TomTom 2024.09 SYGIC 23 # HERE 2024.06 ...