Results 11 to 20 of 32
-
23rd August 2019, 05:47 PM #11
Yes, succeeded.
I own a TT Go 730 and had een sd card of max 2GB.
I have made the firmware-update exactly as you wrote.
After the firmware update I put my 8Gb sd card into my TT Go 730 with navcore 9.702 and the latest Truckcard ( version 1.030). And Yes, I had immediately a gps-fix.
15 minutes later I turned my TT Go 730 on again, and I had again a fast gps-fix.
Question: Does this solution also works with the Tom Tom Go 7.000?Last edited by Hopus; 23rd August 2019 at 05:53 PM.
-
The Following 1 Users Say Thank You to Hopus For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019)
-
23rd August 2019, 05:59 PM #12
Yes, because the GO 7000 is a clone of the GO 930.
-
The Following 5 Users Say Thank You to Charlie62 For This Useful Post:
- [ Click To Expand ]
-
adrianm (8th December 2019), antoniolurdes (13th September 2019), biggerdave (23rd August 2019), briciola31 (25th October 2019), Momatz (1st October 2019)
-
30th August 2019, 07:27 PM #13
Another successful GSW3.2.5 update at here! Now my GO 730 finds satellites like in the old days, also after a warm boot.
-
The Following 3 Users Say Thank You to tohis For This Useful Post:
- [ Click To Expand ]
-
biggerdave (30th August 2019), briciola31 (25th October 2019), Charlie62 (31st August 2019)
-
4th September 2019, 02:08 PM #14
-
The Following 1 Users Say Thank You to artful For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019)
-
4th September 2019, 09:13 PM #15
I tried a lot of SD and SDHC cards (see my post #10). When the card was not compatible, the flashing process did not run and nothing happened, neither positive nor negative. So I think that if your 64 MB SD card works with the flash tool, the firmware will be updated, otherwise nothing will happen.
P. S. You are talking about an MMC card. TomTom recognizes only SD(HC) cards.
-
The Following 3 Users Say Thank You to Charlie62 For This Useful Post:
- [ Click To Expand ]
-
Alfred_ML (6th September 2019), briciola31 (25th October 2019), Momatz (6th October 2019)
-
13th September 2019, 11:21 PM #16
obrigado pela ajuda
Only English, please
Thank you for your helpLast edited by pe1agp; 13th September 2019 at 11:35 PM.
-
The Following 1 Users Say Thank You to antoniolurdes For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019)
-
22nd September 2019, 12:03 AM #17
I used the ultimate solution 3 on a go730 and for now it works. Let you now after 2 weeks if it stil works. I use navcore 9.702 and Europe_TRUCK v1030.9533
Last edited by bibijoy; 22nd September 2019 at 12:08 AM. Reason: added information
-
The Following 2 Users Say Thank You to bibijoy For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019), Charlie62 (22nd September 2019)
-
22nd September 2019, 12:30 AM #18
Yes , the ultimate solution worked for my Go920 using a 2GB SD card to flash.
-
The Following 2 Users Say Thank You to artful For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019), Charlie62 (22nd September 2019)
-
24th September 2019, 04:45 PM #19
Hi. Can you confirm that the Firmware update only fixes the satellite problem and not the clock problem. if that still exists it requires the clock solution to be added.
-
The Following 1 Users Say Thank You to livvy For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019)
-
24th September 2019, 05:41 PM #20
Thank you very much, got
-
The Following 2 Users Say Thank You to CCCOMEYCALLA For This Useful Post:
- [ Click To Expand ]
-
briciola31 (25th October 2019), Charlie62 (25th September 2019)
City Navigator North America NT...
thank you, I will patiently wait for 3d map for...