Results 141 to 150 of 150
-
18th July 2019, 01:11 AM #141
-
The Following 3 Users Say Thank You to fredderf For This Useful Post:
- [ Click To Expand ]
-
#BH* (20th July 2019), 10@10maradona10 (22nd January 2022), biggerdave (18th July 2019)
-
18th July 2019, 01:59 AM #142
-
18th July 2019, 02:32 AM #143
Test with 9.501 from BMW driver.
The Navcore as available as it is available through Mega for replacement at the Europe 1030 9519
At the first start, the Rider v2 resets itself and then starts up normally, unfortunately no satellite reception this time in my radio room.
Then outside in the garden that faces south, also here no satellite reception.
Did a hard reset myself and see at the start, which incidentally took some time, 6 satellites were received immediately.
Turn off the Rider v2 by hand for about 30 seconds.
Unfortunately, after the new start, no satellite reception again, but there are 2 perceptible but in gray and they do not count.
Again a hard reset and all 6 satellites are back, in fact I can walk through the house with it and go to my radio room and the satellites stay on screen.
Now I see 5 pieces and 2 pieces in gray
This is more or less the same behavior as the old 9,500, not the old 9,500c
P.S.
I just connected the Rider v2 to the PC.
Then SiRFStarIII.cmd activated.
At the first, 8 satellites start within a few seconds.
The Rider v2 turned off by hand for about 30 seconds
At the next start, the last one all in my radio room, the 8 satellites are displayed very briefly, after which they all turn gray for a short time and then disappear again just as quickly and instead I see 1 active satellite appearing within 10 seconds supplemented to the number of 8 as before.
In one word, grandiose.
So there are 4, but we don't pay attention to thatLast edited by pe1agp; 28th July 2019 at 06:53 PM.
-
The Following 2 Users Say Thank You to pe1agp For This Useful Post:
- [ Click To Expand ]
-
-
28th July 2019, 06:35 PM #144
please help me, i have a tomtom one v3
SE Navcore 9101.516023 fixdate
date is good, suicide.dat is also on it
do I need ito.dat ?? or the ephem folder ??
SE Navcore 9101.516023 fixdate
date is good, suicide.dat is also on it
everything works fine except ito.dat after reset it is gone
my setconfig.text is:
Current Emulation: x40 light
Changed Menu
BT: 1
TTS: off
Run in Save RAM Mode
changedtext:TomTom ONE
usesetting
noqfixdel
btoff
fmoff
ttsoff
if I give the tomtom a hard reset
then he changes setconfig.text to:
Current Emulation: x40 light
Changed Menu
BT: 1
TTS: off
Run in Save RAM Mode
changedtext:TomTom ONE
btoff
fmoff
ttsoff
this text is away
noqfixdel, usesetting
and I use noqfixdel, so he doesn't delete the ito.dat
but if he always adjusts the setconfig then it doesn't work
Please help me
thanksLast edited by vulliw; 29th July 2019 at 11:04 AM.
-
29th July 2019, 02:16 PM #145
Now I've read your problem at least 4 times on different forums and different threads.
I'll give you one answer, try 9.510 for 32 mb devices
-
30th July 2019, 12:31 PM #146
where can I download it?
also has this fix date?
-
30th July 2019, 12:47 PM #147
-
1st January 2021, 07:51 PM #148
What is working Navcore for TomTom One XL?
-
2nd January 2021, 02:24 AM #149
In my One XL I have 9.541.3145439.2 32mb version with 1060 map
Boot 5.5120 and I put 4gb SDHC but you MUST FORMAT NORMAL, NOT QUICK FORMAT, or will not work.
-
22nd January 2022, 12:56 PM #150
thankssssss all
iGO HERE EUROPE 2024.Q2
Me falta el codigo para extraer el archivo. Mapa...