Results 11 to 20 of 40
-
13th December 2014, 07:45 PM #11
You ran clear flash ?
How long you wait after the drums ?
The "drums" mean it is reloading from core .
You gave it a couple reset's ?
Keep in mind that using version 8 navcore means you stuck with outdated maps .
-
The Following 1 Users Say Thank You to basflt For This Useful Post:
- [ Click To Expand ]
-
tarkan55 (13th October 2019)
-
13th December 2014, 07:46 PM #12
-
The Following 1 Users Say Thank You to yuriyggg For This Useful Post:
- [ Click To Expand ]
-
tarkan55 (13th October 2019)
-
13th December 2014, 07:56 PM #13
I am pretty surprised you can't find ANY 9.510 navcore to run on your 700, what about one of yuris slightly older (but still 9.***) navcores from post #2?
....or even a 9.702 truck one that can run any other map from here (incl my 1st attachment in post #59 therein)
SPAM HUNTER/KILLER
Please do not just post "thanks" but use the "thanks" button bottom/right or the reputation star "*" bottom/leftS i m p l e s
-
13th December 2014, 08:20 PM #14
Yes i got the drums, I got the tomtom logo and then all I got was a clear screen. Nothing else.
I tried one of yuriyggg' s
I don't like being beaten and will have another try.
-
13th December 2014, 09:54 PM #15
I really don't know. Very close to giving up. Will try one of the truck NC just in case that does the trick.
Failing that, I will just try and get an older map and NC on.
I don't think I am doing anything wrong or missing any steps out.
I have proven that my very first backup works, phew
One thing that is puzzling me is that the unit, not connected to the computer or the mains is still showing the green power light. Ah. The reset button has just stopped that
-
13th December 2014, 10:40 PM #16
Check the drive for errors
-Right-click on it > properties > tools
-Format to fat32 ( slow )
It should work .
If it was hardware , you could not load your v8 navcore either .
clear flash and reset after each navcore change , always .
Any 9.510 NC should work AFAIK
-
13th December 2014, 11:05 PM #17
How are you installing each/all of these navcores? Overwriting (my preferred method) or clean install from empty memory?
SPAM HUNTER/KILLER
Please do not just post "thanks" but use the "thanks" button bottom/right or the reputation star "*" bottom/leftS i m p l e s
-
13th December 2014, 11:27 PM #18
Clean install from empty memory.
I've done clearflash a few times.
I'm now using a different computer. Partly so I can watch tv but also something happened, can't remember what, that made me wonder whether it was my AV kicking in.
Is formatting likely to solve this. Bear in mind that it isn't my unit.
-
13th December 2014, 11:31 PM #19
No , but checking for error can not hurt .
If no error , then remove anything from it , then put new navcore it .
Overwriting older navcore is risky !!!!
PS
Antivirus is not likely to interfere with copy/paste navcores
And watching TV neither
-
14th December 2014, 06:09 PM #20
Well I finally managed to get it working but not very well.
I put NC 9_053_one that yuri suggested and UK 940.5963 on it. Its the nearest ive got to a NC that works on it.
It keeps rebooting after a minute or so.
One thing that I have noticed is that if I go to the screen where you can see how much signal you are getting from each satellite, the round symbol in the top right is not spinning like it normally does. I am getting no signal at all.
Garmin Topo France v6 Pro Entire...
Hello, as indicated by FireFox58 in his message...