Results 1 to 5 of 5
-
27th April 2023, 10:02 PM #1
Go 620 No EDL mode
Hi, I wanted to explain my difficulty in entering EDL mode with the go 620. Following the guide, I can do it successfully on the go 520 and go essential, but on 2 go 620 I cannot enter EDL mode. I state that I use the pins indicated for the go 6200 professional. Can anyone tell me if there is any other method or where I'm going wrong. Thanks in advance
yjoliva Reviewed by yjoliva on . Go 620 No EDL mode Hi, I wanted to explain my difficulty in entering EDL mode with the go 620. Following the guide, I can do it successfully on the go 520 and go essential, but on 2 go 620 I cannot enter EDL mode. I state that I use the pins indicated for the go 6200 professional. Can anyone tell me if there is any other method or where I'm going wrong. Thanks in advance Rating: 5
-
7th June 2023, 02:39 AM #2
there are some tomtom motherboard have the issues in entering to EDL mode ///
Last edited by omar droug; 9th June 2023 at 06:25 PM.
-
7th June 2023, 03:48 PM #3
As indicated above, there are problems on some motherboards, it really seems that they are apparently the same but they change the pins to enter EDL mode, as you say you have already done on others without problems, you know the procedure, I would tell you to try different combinations of pins, in the same area where it has worked with others.
regards
-
9th June 2023, 06:27 PM #4
yes thats what I did and works properly with no problem but till now i still have the same problem of tomtom 6200 with I tryed a lot but nothing chenged I also tried all pins around the last pin but not working
-
31st July 2023, 04:16 PM #5
ok, i successfully managed to enter EDL Mode by disconnecting the battery and using the pins suggested in another post. Now I'll try to post the photo
-
The Following 1 Users Say Thank You to yjoliva For This Useful Post:
- [ Click To Expand ]
-
Prodanu (14th May 2024)
POI base - pocketnavigation...
More radars in Spain from the old EsRadar base...