Results 1 to 10 of 21
-
6th December 2022, 06:10 PM #1
Patch MSTMS-Nav5-Navcore 22.100 (rev1)
Tips that can help, in terminal write chmod +x patch_nav5.sh remove_patch_nav5.sh
thus ensuring that these archives are executable.
Then in terminal write the as below according to the task you want to do.
install patch; ./patch_nav5.sh
remove patch; ./remove_patch_nav5.sh
This patch also contains remove_patch_nav5 file; it is to uninstall the patch (ANY previous Nav5 version that has been installed) for the reason that is, connect MDC or any other reason, it is used just as to install EDL mode patch.
Note this patch will install meta.txt latest
In the case that for some reason it loses its splash folder 3_splash it contains 3 different files & you can add them using the following route; /data/ttcontent/common/installed.
Download links:- from MSTMS orMSTMS Reviewed by MSTMS on . Patch MSTMS-Nav5-Navcore 22.100 (rev1) Tips that can help, in terminal write chmod +x patch_nav5.sh remove_patch_nav5.sh thus ensuring that these archives are executable. Then in terminal write the as below according to the task you want to do. install patch; ./patch_nav5.sh remove patch; ./remove_patch_nav5.sh This patch also contains remove_patch_nav5 file; it is to uninstall the patch (ANY previous Nav5 version that has been installed) for the reason that is, connect MDC or any other reason, it is used just as to install Rating: 5Last edited by MSTMS; 7th December 2022 at 12:28 AM. Reason: add tips
-
The Following 11 Users Say Thank You to MSTMS For This Useful Post:
- [ Click To Expand ]
-
biggerdave (9th December 2022), dopalaczxl (7th December 2022), nexoo (4th December 2023), omar droug (9th December 2022), pe1agp (8th December 2022), sHAKaJaada (2nd January 2023), simba (7th December 2022), Sonaps (10th December 2022), spoon1 (7th December 2022), Xius27 (6th December 2022), yopy (8th December 2022)
-
8th December 2022, 02:33 AM #2
Post #1 above edited with new/cleaner rev1 download
SPAM HUNTER/KILLER
Please do not just post "thanks" but use the "thanks" button bottom/right or the reputation star "*" bottom/leftS i m p l e s
-
The Following 5 Users Say Thank You to biggerdave For This Useful Post:
- [ Click To Expand ]
-
nexoo (4th December 2023), pe1agp (8th December 2022), sHAKaJaada (2nd January 2023), simba (9th December 2022), spoon1 (8th December 2022)
-
9th December 2022, 09:35 PM #3
is there anyway else for installing this patsh if there is problem entering EDL mode even pinout don't work ...
-
9th December 2022, 11:22 PM #4
at the moment I don't know any other way other than EDL mode, there are many apparently identical models, put a photo of your plate and say the exact model and the first 2 letters of your serial number and maybe someone can help you find the pinouts.
regards
-
The Following 2 Users Say Thank You to simba For This Useful Post:
- [ Click To Expand ]
-
omar droug (10th December 2022), Sonaps (10th December 2022)
-
10th December 2022, 01:44 AM #5
Thank you but I did what I have in EDL mode patsh images but there are many devices that have a hardware problem because I entred many tomtom gps in EDL mode but there some devices even if they are the same model
-
10th December 2022, 02:08 AM #6
i already commented that apparently equal plates are different you have to try to do tests where the pinout of your plate are.
Make sure you have the drivers installed, has you put any other device in that same PC?
example this photo was put by a partner and you will see that it is not in the attached photos of the patch.
regards
-
The Following 1 Users Say Thank You to simba For This Useful Post:
- [ Click To Expand ]
-
nexoo (4th December 2023)
-
13th December 2022, 01:05 AM #7
EDL Mode Problem
I tried even this pinout and a lot of attemting without succes so I need software trick to enter EDL mode Bro or other pinout if there are professionals here who have knowledg about hardware to give us another solution like putting files in memory card like previous method that used in NAV4 devices ..also replying on your question about driver I also installed them and it worked because I ve already patched a lot of tomtom 6200 but this tomtom Go 6200 is deffirently doesn't work
Last edited by omar droug; 13th December 2022 at 01:14 AM.
-
13th December 2022, 12:37 PM #8
Good morning,
Why does traffic information stop working when I unlock my device? I have a Tomtom go 520. Thanks.
-
15th December 2022, 02:23 PM #9
Hello, has anyone experienced this? Can anyone give me an answer? Thank you.
-
16th December 2022, 02:47 AM #10
@ omar droug .. there is only one way to patch Nav5 and it's MSTMS patch with the two pinout to put the tomtom into EDL Mode, there is no other way ... so excuse me but it's a your own problem , it's not a general problem, i mean you can't do it but all other users can do it, so you must understand than MSTMS team can not do an other metod only for you ...because 1) maybe there is no other way to patch nav5, 2) why to find an other way when problem was solved, when they had found the metod , anf it works perfect .
So no ask for an other solution, but the more good thing id that you must learn it, you must try more , push more ! and then you'll arrive to do it well
@ jovesp1975 i put this new patch into a tomtom professional 6250 and into a go 520 ... it works perfect also traffic works without any problems , so maybe is only your tomtom to had problems and if i remember well you had this problem also with others patch also with 21.200 you had same problem ( as you wrote into italian forum) so it's no a patch problem , but it's a your tomtom problem, so no easy to solve if you no give us more infoLast edited by spoon1; 16th December 2022 at 02:54 AM.
-
The Following 4 Users Say Thank You to spoon1 For This Useful Post:
- [ Click To Expand ]
-
biggerdave (16th December 2022), omar droug (17th December 2022), PeterHimself (16th December 2022), sHAKaJaada (12th November 2023)
Garmin Topo France v6 Pro Entire...
Hello, as indicated by FireFox58 in his message...