Results 41 to 50 of 77
-
25th February 2022, 02:55 AM #41
every tomtom Nav3 , Nav4 and Nav5 you can change into Truck or Camper version , using MSTMS patch
on Nav3 you can use TTActivator ... use Europe truck map and navcore patch truck for trasform any Nav3 into a Truck version or use normal navcore patch and Europe Camper map to trasform your tomtom into Camper
about Nav4 and Nav5 they have only one software/navcore and there is the MSTMS patch for Camper or truck version , at the same time tomtom for camper use europe camper map + MSTMS camper patch and europe truck map and MSTMS truck patch for trasform your tomtom into Truck
so with MSTMS patchs now you can modify everyt omtom into a TRUCK or Camper version
if i not wrong it's like i told you now !
-
The Following 1 Users Say Thank You to spoon1 For This Useful Post:
- [ Click To Expand ]
-
Charlie62 (25th February 2022)
-
27th February 2022, 03:42 AM #42
Hello Spoon1,
Thank you for your reply.
I just updated the navcore of my GO 510. The version of the new navcore is 21.200.0003.311 from 09/11/2021.
However, the patch for NAV4 seems to be intended only for the navcore 21.100.0001.311. Can I still use it or is it dangerous for my GO 510?
Thank you in advance for your answer and also thank you for all your messages of help and troubleshooting.
Regards
Charlie62
P.S. Please excuse my bad English: I never learned it and I have to use Google Translate.
-
27th February 2022, 04:13 AM #43
Hi the patch works also into navcore: 21.200.0003.311 , look about Orni work that she do different emulation for Truck and Camper
best thing if made a backup , it's need long time (some hours) but it's could help you later if you could have same problems
my english is bad too ....are you the Charlies62 that into Italian forum (maybe also in others) found solution for tomtom nav2 gps problems ?
-
The Following 1 Users Say Thank You to spoon1 For This Useful Post:
- [ Click To Expand ]
-
Charlie62 (27th February 2022)
-
27th February 2022, 04:30 AM #44
Hi Spoon1,
Thank you for your reply. I will try to patch my GO 510 (I just bought it to do a test).
Yes, I'm the Charlie62 (or Jogger62 on a few other forums) who helped fix some WNRO issues on the Nav2 with speedy29 (GbcNet), Lecter, treysis and jungblume2005 (Digital Eliteboard). See the link below.
-
The Following 1 Users Say Thank You to Charlie62 For This Useful Post:
- [ Click To Expand ]
-
spoon1 (27th February 2022)
-
27th February 2022, 04:41 AM #45
Good , very nice person
try with Orni emulation , she done a great job , see you and thanks for your work.
-
The Following 2 Users Say Thank You to spoon1 For This Useful Post:
- [ Click To Expand ]
-
-
27th February 2022, 04:56 AM #46
Hi Charlie52, I'm glad to read you. How many emotions in that period to find solutions to the well-known problem.
A warm greeting from Speedy29.
Sorry, but I used the Google translator
-
The Following 2 Users Say Thank You to speedy29 For This Useful Post:
- [ Click To Expand ]
-
-
27th February 2022, 09:52 AM #47
Hi Speedy29,
I'm also happy to hear from you! I hope you have been spared by the Covid, as well as your loved ones.
Take care !
Sincerely
Charlie62
-----------
Ciao Speedy,
Mi fa piacere leggerti anche io! Spero che tu sia stato risparmiato dal Covid, così come dai tuoi cari.
Stai attento !
Cordiali saluti
Charlie
-
The Following 1 Users Say Thank You to Charlie62 For This Useful Post:
- [ Click To Expand ]
-
speedy29 (27th February 2022)
-
28th February 2022, 08:27 AM #48
Hi Spoon1,
I patched my GO 510 and installed the Europe_HM_Truck map on a 16 GB SD card. It is indeed among the installed maps, but when I select it, in reality it is always the old map that remains active (the one that is in internal memory), and I never see the truck or RV menu options. How do I force the selection of the Truck card?
Also, do you know how we do a screenshot on a Nav4 (I know how we do it with a Nav2, but I'm starting with Nav3, Nav4 and Nav5)?
Another problem: I can connect without problem to the GO 510 with WinScp in normal mode, but I only see the internal memory and not the SD card. I can't log into recovery mode. How do I see the SD card as well?
-
28th February 2022, 03:40 PM #49
use filezilla
install and open filezilla and open port to: 169.254.255.1
so connect your tomtom in normal mode , just turn on it (it must be with MSTMS pach inside)
i mean in the top on the left put into Host: 169.254.255.1 and then press to connect
now youn can see your tomtom internal memory
to go to the map into internal memory : /data/ttcontent/common/installed
to go to the map into micro sd card : /mnt/9c06a55f-a423-4db4-a6b1-16f5bc3d761e-dm-0/common/installed
look: 9c06a55f-a423-4db4-a6b1-16f5bc3d761e is the name of my micro sd card and this name will always change from micro sd to an other micro sd
so now your europe truck map is no activable , why ?
probably because patch had not generate the file .dct activation...so go to micro sd , go inside the Europe_HM_Truck map and so you must see if there is the file .dct to active the map
is there is no map file .dct then go here : /data/ttcontent/common/installed
and copy/paste, just drag the file from your pc to tomtom using Filezilla , so put inside this file:
So put this file Meta inside tomtom and then restart tomtom and active map again with MSTMS patch and you'll see that noe tomtom can load the Europe Truck map
if no load it, then go to Europe truck map inside sd with Filezilla and delete the file .dct activation map , then restart tomtom and active map again with MSTMS patch and now it must works !
Last edited by spoon1; 28th February 2022 at 03:47 PM.
-
The Following 2 Users Say Thank You to spoon1 For This Useful Post:
- [ Click To Expand ]
-
-
28th February 2022, 09:37 PM #50
Hi spoon1,
Thank you for your help.
I explored my GO 510 with Filezilla and WinSCP, which I have already been using for several years for my FTP transfers. It works great with both. I didn't know that I had to go to the "mnt" folder to access the SD card (thanks for this information!!!). I continued my manipulations with WinSCP.
1) There was indeed a *.dct file in the Europe_HM_Truck map: Europe_HM_TRUCK-103306.meta.dct.
2) The Europe_HM_Truck map references in my meta.txt file were different from yours:
Your meta.txt:
AD B5 42 70 60 EC AA C4 30 37 1D B8 FA E5 60 A2 Europe_East-103344.meta;Europe_East 1085_11379
BD CE E6 CD 8B F7 8D 09 D5 80 E2 3E 60 03 22 02 Europe_HM_TRUCK-103306.meta ;Europe_HM_TRUCK 1085_11333
BD CE E6 CD 8B F7 8D 09 D5 80 E2 3E 60 03 22 02 Europe_HM_TRUCK-103306.meta ;Europe_HM_TRUCK 1085_11333
17 56 6E 33 9B 12 1D 80 0A C7 BB FE F6 95 6E 87 Europe_North_1GB-103287.meta ;Europe_North_1GB 1085_11311
My meta.txt:
AD B5 42 70 60 EC AA C4 30 37 1D B8 FA E5 60 A2 Europe_East-103344.meta;Europe_East 1085_10795
BD CE E6 CD 8B F7 8D 09 D5 80 E2 3E 60 03 22 02 Europe_HM_TRUCK-103306.meta ;Europe_HM_TRUCK 1085_10739
BD CE E6 CD 8B F7 8D 09 D5 80 E2 3E 60 03 22 02 Europe_HM_TRUCK-103306.meta ;Europe_HM_TRUCK 1085_10740
17 56 6E 33 9B 12 1D 80 0A C7 BB FE F6 95 6E 87 Europe_North_1GB-103287.meta ;Europe_North_1GB 1085_11238
N. B. The Europe_HM_Truck map appears twice in the 2 meta.txt files, but with an identical hexadecimal code!
3) I replaced my meta.txt file with yours, deleted the Europe_HM_TRUCK-103306.meta.dct file and rebooted the GO 510. After verification, a new Europe_HM_TRUCK-103306.meta.dct file has been created.
4) It is still impossible to select the Europe_HM_Truck map, it is still the EU_no3D_France_3D map which remains active :-(!!!
I'm going to do a test with a simple Truck Europe map (non HM) or a Camper Europe map (their references are not duplicated in the meta.txt files), and I'll let you know.
Have a good day and see you soon.
Charlie
-----------------------------------------
In italiano (con l'aiuto di Google )
Ciao spoon1,
Grazie per l'aiuto.
Ho esplorato il mio GO 510 con Filezilla e WinSCP, che utilizzo già da diversi anni per i miei trasferimenti FTP. Funziona benissimo con entrambi. Non sapevo di dover andare nella cartella "mnt" per accedere alla scheda SD (grazie per questa informazione!!!). Ho continuato le mie manipolazioni con WinSCP.
1) C'era effettivamente un file *.dct nella mappa Europe_HM_Truck: Europe_HM_TRUCK-103306.meta.dct.
2) I riferimenti della mappa Europe_HM_Truck nel mio file meta.txt erano diversi dai tuoi:
Il tuo meta.txt:
AD B5 42 70 60 EC AA C4 30 37 1D B8 FA E5 60 A2 Europe_East-103344.meta;Europe_East 1085_11379
BD CE E6 CD 8B F7 8D 09 D5 80 E2 3E 60 03 22 02 Europe_HM_TRUCK-103306.meta ;Europe_HM_TRUCK 1085_11333
BD CE E6 CD 8B F7 8D 09 D5 80 E2 3E 60 03 22 02 Europe_HM_TRUCK-103306.meta ;Europe_HM_TRUCK 1085_11333
17 56 6E 33 9B 12 1D 80 0A C7 BB FE F6 95 6E 87 Europa_Nord_1GB-103287.meta ;Europa_Nord_1GB 1085_11311
Il mio meta.txt:
AD B5 42 70 60 EC AA C4 30 37 1D B8 FA E5 60 A2 Europe_East-103344.meta;Europe_East 1085_10795
BD CE E6 CD 8B F7 8D 09 D5 80 E2 3E 60 03 22 02 Europe_HM_TRUCK-103306.meta ;Europe_HM_TRUCK 1085_10739
BD CE E6 CD 8B F7 8D 09 D5 80 E2 3E 60 03 22 02 Europe_HM_TRUCK-103306.meta ;Europe_HM_TRUCK 1085_10740
17 56 6E 33 9B 12 1D 80 0A C7 BB FE F6 95 6E 87 Europa_Nord_1GB-103287.meta ;Europa_Nord_1GB 1085_11238
N. B. La mappa Europe_HM_Truck compare due volte nei 2 file meta.txt, ma con un identico codice esadecimale!
3) Ho sostituito il mio file meta.txt con il tuo, eliminato il file Europe_HM_TRUCK-103306.meta.dct e riavviato il GO 510. Dopo la verifica, è stato creato un nuovo file Europe_HM_TRUCK-103306.meta.dct.
4) È ancora impossibile selezionare la mappa Europe_HM_Truck, è ancora la mappa EU_no3D_France_3D che rimane attiva :-(!!!
Farò un test con una semplice mappa Truck Europe (non HM) o una mappa Camper Europe (i loro riferimenti non sono duplicati nei file meta.txt), e ti farò sapere.
Buona giornata e a presto.
Charlie
Garmin City Navigator Europe NTU...
Welcome to the forum. Your device uses these NTU...