Results 1 to 10 of 10
-
24th July 2021, 07:20 AM #1
Tom Tom Go Brick
hi, I upgraded my tomtom go navcore by inserting a wrong one. Now I see this screen .
I tried to perform the recovery procedure with Mydrive and recovery but it doesn't start. Also Ttactivator doesn't detect it. Can anyone help me?
The model is Go 4CS01mexus94 Reviewed by mexus94 on . Tom Tom Go Brick hi, I upgraded my tomtom go navcore by inserting a wrong one. Now I see this screen https://drive.google.com/file/d/1RuUr-psCfUD00CimEFnhYs42QxFTPmoh/view?usp=sharing. I tried to perform the recovery procedure with Mydrive and recovery but it doesn't start. Also Ttactivator doesn't detect it. Can anyone help me? The model is Go 4CS01 Rating: 5
-
24th July 2021, 11:36 AM #2
-
18th August 2021, 07:15 PM #3
Would it be possible for you to elaborate on the "TomTom Business Solution"? I have a Nav3 VIA 125 that is misbehaving and recovery doesn't start using MyDrive. Would love to find another way to flash nascore versions.
-
18th August 2021, 07:45 PM #4
-
18th August 2021, 09:01 PM #5
Thanks but unfortunately mine and OP's devices are not recognised by TTActivator.
Mine starts up directly to the gears
and after a while(about half an hour) goes to the following screen:
If I connect it to the PC I do get
but starting MyDrive does not trigger the recovery mode. MyDrive will start normally see my device as connected but requesting anything(removal or updating) will make it say that the device is not responding.
-
18th August 2021, 10:17 PM #6
Nav3 VIA 125: NC 12.075.3065980.84 ; Start 20/25 - Via 130/135 - VIA 1535 Downloadlink for NC 12.075.3065980.84 :
Turn off VPN
Start TomTom MyDrive Connect,
wait for connection,
Quit TomTom MyDrive Connect completely. Load the NC with TTActivator.
Sorry, translated with Google
-
The Following 1 Users Say Thank You to jungblume2005 For This Useful Post:
- [ Click To Expand ]
-
Orni (19th August 2021)
-
19th August 2021, 01:52 AM #7
Have you tried changing the cable and the usb port?
Last edited by Orni; 19th August 2021 at 02:07 AM.
-
23rd August 2021, 04:36 PM #8
Thanks for your support but it looks like my VIA is really not responding.
The business tool gives installation failed directly after searching device and the emergency recovery gives "PND device is currently not connected to the machine."
All on the gears screen as well as the red cross screen and with both original and aftermarket cabels that normally have no problems. Luckily it was just an extra device.
-
23rd August 2021, 10:18 PM #9
Uninstall My drive connect.
Restart the pc.
Install My drive connect again.
Plug in the device again.
-
24th August 2021, 12:37 AM #10
Try to reinstall the navcore...
I sell and update cards with personalized CID, for more information, contact me by private message, respond in less than 24 hours
Garmin City Navigator Europe NTU...
Hello, thank you for your answer! Do i have to...