Results 1 to 10 of 11
-
25th June 2020, 10:19 PM #1
Recovery nav3
Requirements:
- A nav3 device.
- A PC or Mac with the official Tomtom My drive connect program
The device without usb cable.
To get to the recovery mode, we first reset until we hear the drums.
We let the device start.
Press the on / off button until you see the black screen with white letters.
With the black screen in view, we press the on / off button three times. We should see an image similar to this:
The device asks for the connection to the pc or mac. TTActivator is turned off on pc or mac.
You connect the device with the usb cable to your pc or mac.
If the MDC program does not start, start it from windows startup.
You should see the program like this:
The program is in recovery mode restoring your device. When finished your device displays this image and reboots.
You may need to update your device again, check the forum if you don't know what you are doing.
Take pictures of your process to help other classmates.Orni Reviewed by Orni on . Recovery nav3 Requirements: A nav3 device. A PC or Mac with the official Tomtom My drive connect program The device without usb cable. To get to the recovery mode, we first reset until we hear the drums. Rating: 5
-
The Following 12 Users Say Thank You to Orni For This Useful Post:
- [ Click To Expand ]
-
alex1963 (24th July 2021), asturcon57 (25th June 2020),
carolinabeatriz(24th December 2023), dosibox (7th January 2021), enes2009 (29th June 2020), florinpur (13th February 2021), Jeanet (27th July 2020), pe1agp (25th June 2020), pringles (28th November 2021), Proukaet (26th June 2020), Xius27 (25th June 2020), yopy (27th June 2020)
-
16th November 2020, 03:50 AM #2
Hello, my tomtom go live 1000 was first updated with TTActivator-v1.15. Some things didn't work well, I installed a manual navcore and my tomtom didn't open again. I'm doing recovery, it doesn't work and gets stuck in the last place, I wait for hours. It says 100%, but it stays that way, it doesn't feel right.
What could be the problem?
-
The Following 1 Users Say Thank You to oxili For This Useful Post:
- [ Click To Expand ]
-
carolinabeatriz(24th December 2023)
-
16th November 2020, 05:26 AM #3
Think I just solved it. First I did recovery mode. The weird thing was that it opened with a loading on the screen before a black screen appeared. Without opening any program, I connected it directly to upload_ttpkg manually. With using this I uploaded navcore and it worked.
-
The Following 1 Users Say Thank You to oxili For This Useful Post:
- [ Click To Expand ]
-
biggerdave (16th November 2020)
-
1st December 2020, 09:25 PM #4
Thanks Orni, I followed your advice ,backed it up no problem.
my question is where does my drive connect store the backup files ,and if i need to restore from backup.
how do you restore the tomtom ,did not see the option in my drive connect
thanks
-
The Following 1 Users Say Thank You to bernieo For This Useful Post:
- [ Click To Expand ]
-
alex_yunlin (29th June 2024)
-
2nd December 2020, 01:26 AM #5
It is only supported online.
-
The Following 2 Users Say Thank You to Orni For This Useful Post:
- [ Click To Expand ]
-
bernieo (2nd December 2020), biggerdave (2nd December 2020)
-
22nd March 2021, 02:41 AM #6
tomtom goes itself to recovery mode. On first startup it reboots and on second goes to recovery mode but mydrive doesn't start recovery progress.
Will try on another pc not laptop maybe will help :]
-
24th March 2021, 01:36 AM #7
Your cable is probably bad, check with another.
Do you use a device holder to connect to the pc?
-
The Following 1 Users Say Thank You to Orni For This Useful Post:
- [ Click To Expand ]
-
Xius27 (26th March 2021)
-
26th March 2021, 02:56 AM #8
yes using holder with mini usb cable. I will try with just original lead to tomtom when it arrives .
-
26th March 2021, 04:17 AM #9
-
The Following 2 Users Say Thank You to Xius27 For This Useful Post:
- [ Click To Expand ]
-
-
30th August 2023, 08:44 PM #10
Hello guys, I have such a problem, TTAactivator refuses to install the patch and meta, package loading error:
The following packages caused an error:
-install_truck_patch.ttpkg
Message:
2-3065980-13-0-7113-27-0-1-0-CURL:23-HTTP:200-USB:1-dwnl: 223KB 14-7113-ERROR write: Broken pipe. ERROR write: Broken pipe, block write fail:1.
Navcore TTActivator It loads normally, but the patch and the meta do not want, all the time an error (
What does this mean please help
Last edited by zergulez; 3rd September 2023 at 12:59 PM.
City Navigator Europe NT 2025.10...
New map requires 14 GB......... with GE & the...