Results 1 to 3 of 3
-
27th May 2020, 03:48 PM #1
Install map on microsd card [Better option]
Disclaimer
We take no responsibility for any damage such as data loss or unusable devices as a result of patching. Read carefully and follow at your own risk.
We recommend that you avoid using MyDrive Connect after applying the patch to avoid possible bans that may occur (no evidence of this happening right now, but who knows what will happen in the future). MyDrive Connect will also report that any activated content requires "Repair" - this will remove the content from your device and not actually repair it.
Important : The MSTMS patch is launched when the device is rebooted : when you install a new map or a new meta, you'll need to reboot to the drums your device.
Once the MSTMS patch is installed, it is permanent : the only way to remove it, is to use
Requirements
To use MSTMS tools, users must first install MyDrive Connect, if they have not already done so.
The reason is that the MDC application installs the TomTom network driver, without this driver the connection to nav3 will be impossible.
WindowsJava 8 or newer
.NET Framework 4 or above (preinstalled on most recent Windows version)NAV3 device with these navcore versions (check Settings >> Me and my device >> About my device):12.075.3065980.74
12.075.3065980.84
12.075.3065980.94
12.101.1102232.101
12.104.1738032.101
Remember, it is better to use the maps on the microSd card (max. 16Gb) of the device. The management of the map on the card is easier from the R-link explorer application.
We will use the Djeman R-Link Explorer program to format the card, I have observed that it is better to do it with the program, than to format the card with the gps.
We can follow this manual to format...
If we have followed the tutorial we must have the card with a map.
We make sure that map can be activated.
Before putting the card we have to put the corresponding patch on the device, if it is a normal map MSTMS, if it is truck MSTMS_Truck.
We make sure that our gps is a nav3 seeing that your navcore is one of those mentioned above (check Settings >> Me and my device >> About my device).
Before putting the card we have to put the corresponding patch on the device, if it is a normal map MSTMS, if it is truck MSTMS_Truck.
We install the selected patch ...
We perform a reset until we hear the drums.
We install the new meta.txt...
We perform a reset until we hear the drums.
We place the card with the map installed.
We perform a reset until we hear the drums.
If everything went well, you'll be able to select the map and use it !Orni Reviewed by Orni on . Install map on microsd card [Better option] Disclaimer We take no responsibility for any damage such as data loss or unusable devices as a result of patching. Read carefully and follow at your own risk. We recommend that you avoid using MyDrive Connect after applying the patch to avoid possible bans that may occur (no evidence of this happening right now, but who knows what will happen in the future). MyDrive Connect will also report that any activated content requires "Repair" - this will remove the content Rating: 5Last edited by Orni; 1st June 2020 at 12:22 AM.
-
The Following 13 Users Say Thank You to Orni For This Useful Post:
- [ Click To Expand ]
-
Alfred_ML (28th May 2020), angelig (27th May 2020), asturcon57 (27th May 2020), bblade (31st May 2020), biggerdave (27th May 2020), imlost (28th May 2020), jesusbus (27th May 2020), LAMedia (1st June 2020), pe1agp (27th May 2020), Polligru (1st December 2021), ROMASLTU (29th May 2020), Sonaps (27th May 2020), Xius27 (27th May 2020)
-
29th November 2021, 07:04 PM #2
truck patch link is no longer available.can you repost it
-
29th November 2021, 08:12 PM #3Collection; NAV2: GO 300 (M1); ONE XL (L1); GO XXL (GQ); GO XL (RS); GO 910 (V7); GO 950 LIVE (W1)
NAV3: GO 820 LIVE (FU) NAV5: GO 5200 (ZB)
UM - Trucker POI Professional...
hello could someone share the ttokg - Trucker...