Results 1 to 10 of 30
-
25th May 2020, 08:48 PM #1
Upload_ttpkg file uploader
Upload_ttpkgDisclaimer
file uploader
We take no responsibility for any damage such as data loss or unusable devices as a result of patching. Read carefully and follow at your own risk.
We recommend that you avoid using MyDrive Connect after applying the patch to avoid possible bans that may occur (no evidence of this happening right now, but who knows what will happen in the future). MyDrive Connect will also report that any activated content requires "Repair" - this will remove the content from your device and not actually repair it.
Important : The MSTMS patch is launched when the device is rebooted : when you install a new map or a new meta, you'll need to reboot to the drums your device.
Once the MSTMS patch is installed, it is permanent : the only way to remove it, is to use
Requirements:
To use MSTMS tools, users must first install MyDrive Connect, if they have not already done so.
The reason is that the MDC application installs the TomTom network driver, without this driver the connection to nav3 will be impossible.
WindowsJava 8 or newer
.NET Framework 4 or above (preinstalled on most recent Windows version)
It is a tool that allows communication to your gps, being able to send ttpkg packages for installation.
From this tool you can send and install patches like MSTMS (normal and truck), map and patch cleaners, or maps to be installed on your device. Everything going in compressed packages with the native format "ttpkg".
It is used by dragging over it the "ttpkg" packages that you want to install.
In case of files by parts like a map of Europe Zone 3, we will drag all the packages at once on this loader.
The file with .bat extension is for the Windows environment and the file with .sh extension is for Linux
You must mention the origin and source, and appreciate the great work of MSTMS.Orni Reviewed by Orni on . Upload_ttpkg file uploader Upload_ttpkg file uploader Disclaimer We take no responsibility for any damage such as data loss or unusable devices as a result of patching. Read carefully and follow at your own risk. We recommend that you avoid using MyDrive Connect after applying the patch to avoid possible bans that may occur (no evidence of this happening right now, but who knows what will happen in the future). MyDrive Connect will also report that any activated content requires Rating: 5Last edited by Orni; 1st June 2020 at 12:24 AM.
-
The Following 18 Users Say Thank You to Orni For This Useful Post:
- [ Click To Expand ]
-
adrianm (30th May 2020), Alfred_ML (28th May 2020), asturcon57 (26th May 2020), barzov123 (28th November 2021), biggerdave (26th May 2020), cat910 (1st June 2020), florinpur (3rd January 2021), george77ro (12th August 2021), Hopus (9th June 2020), Kajoe (1st June 2020), oxili (26th May 2020), QUIN1965 (26th May 2020), raulconte (1st June 2020), seca (30th July 2020), Sonaps (26th May 2020), XisiX (26th May 2020), Xius27 (26th May 2020), yopy (29th May 2020)
-
9th June 2020, 08:19 PM #2
@Orni,
I have a TT Start 25.
I succeeded to put the map BeNeLux into the internal memory
of my Tom Tom. The card is working fine. Than I tried to install
the safetycams of Holland on my TomTom. I saw the black screen with the
massage that the installation was successfully installed.
I restarted my TT with TTActivator.
But when I took a demo ride along 2 safetycams, nothing happened. Tom Tom Start 25 didn't
show the safetycams. Also there was no alarm signal.
What did I wrong?Last edited by Hopus; 9th June 2020 at 10:31 PM.
-
9th June 2020, 08:34 PM #3
in tomtom menu, manage POI, warn if POI close, activated the radars that you want me to warn you ??
regards
-
9th June 2020, 10:32 PM #4
-
9th June 2020, 10:38 PM #5
-
9th June 2020, 10:55 PM #6
-
The Following 1 Users Say Thank You to Orni For This Useful Post:
- [ Click To Expand ]
-
QUIN1965 (10th June 2020)
-
10th June 2020, 01:35 PM #7
I collect the safetycams with the tool TTActivator.
In TTActivator I choose for manual installation.
Then I select the safetycam-nl-premium-04-06-2020_ttkpg and place this in upload_ttpkg.
After about 20 seconds, my pc indicates that the installation was successful. Press any key to continue....
Then I disconnect my Tom Tom Start 25 from the pc.
Start up my Tom Tom Start 25 untill I hear the drums.
On my TT Start 25 I also looked at "services / safetycam / notifications settings.
When I drive a demo-route along 3 safetycams, they will still not be displayed. Neither any warning(sound)
The second time I did exactly the same I described above.
For activation this time I went back to the tool TTActivator / NAV3 Tools. I chose for a restart devive.
Again no speed camaras were indicated along the route.
What did I wrong.
-
10th June 2020, 01:56 PM #8
Display an image of the select a type configuration screen.
You must install the MSTMS patch with TTActivator.
You must install a meta.txt.
You must install the "ttpkg" package from the chosen country.
You must reset your device, you can do it from TTActivator.
You must enable the speed camera configuration
You must enter the configuration
You must have on the screen select a type each radar category with a speaker icon on the left.
All this does not ensure that your TT alerts you to all cameras on the road.
Indicate the route you are taking and what cameras exist so that other colleagues can verify if those points are marked.Last edited by Orni; 10th June 2020 at 01:59 PM.
-
10th June 2020, 02:03 PM #9
It works perfectly for me with danger zones, but no reason that it doesn't work with other speed cameras.
-
10th June 2020, 02:29 PM #10
Oké, I tried to put some pictures to my reply.
Where can I find the possibility to put some pictures to my reply?Last edited by Hopus; 10th June 2020 at 02:52 PM.
2023.Q2 Here Australia,New Zealand
Australia New_Zealand HERE 2024.Q2 please