Results 1 to 7 of 7
-
28th January 2020, 11:30 PM #1
The pdis does not appear on the map
I have a Go950 device, which works with a navcore Truck that I have on an sd card. The problem is that, in the last two updates that I have put in the Europe Truck map, that is to say after 1035, the pdis no longer appear on the map, although I select them to appear. The search for a pdi does work, that is, the pdi are recognized there, but I don't have a general visualization on the map, which I find very useful. Versions 1030 and older did not have that problem, it is more, without being selected, a pdi appeared on the map, from which we were looking for it. The only thing that happened was that very close pdis covered each other, normal thing, because they overlapped. But the problem now is that, right now, later versions 1035 and 1041 do not show any pdi on the map. And it does not happen that there are many pdis and that some stop going out because of capacity, but that none comes out.
Thanks for your help.otin Reviewed by otin on . The pdis does not appear on the map I have a Go950 device, which works with a navcore Truck that I have on an sd card. The problem is that, in the last two updates that I have put in the Europe Truck map, that is to say after 1035, the pdis no longer appear on the map, although I select them to appear. The search for a pdi does work, that is, the pdi are recognized there, but I don't have a general visualization on the map, which I find very useful. Versions 1030 and older did not have that problem, it is more, without being Rating: 5
-
29th January 2020, 05:55 PM #2
With “pdi” you mean POI (Points Of Interest)?
PeterLast edited by PeterHimself; 29th January 2020 at 06:38 PM.
Collection; NAV2: GO 300 (M1); ONE XL (L1); GO XXL (GQ); GO XL (RS); GO 910 (V7); GO 950 LIVE (W1)
NAV3: GO 820 LIVE (FU) NAV5: GO 5200 (ZB)
-
29th January 2020, 11:57 PM #3
Yes, I want to say poi. I think it is the same thing. Sorry.
Now I imagine that it is so, because in spanish is "Punto de Interés".Last edited by otin; 30th January 2020 at 12:00 AM.
-
30th January 2020, 03:10 PM #4
Ok I understand.
Could it be that one of the POI files (crpoi.dat and poi.dat) is missing in the 1035 or 1041 map?
You can compare them with the older 1030 map.
If so, try to download the map from a different location.
PeterLast edited by PeterHimself; 30th January 2020 at 03:52 PM.
Collection; NAV2: GO 300 (M1); ONE XL (L1); GO XXL (GQ); GO XL (RS); GO 910 (V7); GO 950 LIVE (W1)
NAV3: GO 820 LIVE (FU) NAV5: GO 5200 (ZB)
-
31st January 2020, 03:58 AM #5
Can I put crpoi.dat or poi.dat of the 1030 map into 1041 map?
I mean: can I use the same old files in 1041 map?
-
31st January 2020, 04:00 PM #6
Yes that is possible. You can also try to download the 1041 from an other place. You could try and use . With that you can download and activate those maps directly on your device if it is connected with you PC.
PeterCollection; NAV2: GO 300 (M1); ONE XL (L1); GO XXL (GQ); GO XL (RS); GO 910 (V7); GO 950 LIVE (W1)
NAV3: GO 820 LIVE (FU) NAV5: GO 5200 (ZB)
-
1st February 2020, 01:34 AM #7
City Navigator Europe NT 2025.10...
I would get a 32GB SD card they are only a few...