Results 11 to 14 of 14
-
13th January 2015, 12:12 AM #11
No way I can mod them and take out the ones I dont want
-
13th January 2015, 12:40 AM #12
Correct; no way!
Maybe a) buy a cheapo x20/x30 from ebay (which has an SD slot and could therefore run any map) or b) even try
SPAM HUNTER/KILLER
Please do not just post "thanks" but use the "thanks" button bottom/right or the reputation star "*" bottom/leftS i m p l e s
-
13th January 2015, 01:39 AM #13
-
14th January 2015, 01:56 AM #14TomTom Expert
Thank you for this Yuri. I totally agree, soldering in a SD card holder or adaptor is only way. It is not a difficult task. I've possibly done approx 50 now. If you not used to soldering, use a fine tip, plenty of flux in the solder - multicore is a good brand and make sure tip is clean - use wet sponge to clean. Do NOT solder directly to a card as you WILL damage it if you are not proficient. Again, if not proficient, use stranded cable as easier to solder. And only touch surfaces a very short time. 24 AWG Ethernet patch cable is easy to use, each cable length between 25 and 38mm is fine. Pre-solder both ends, then is a very simple task. Takes longer to open the case.
Garmin Topo France v6 Pro Entire...
Hello, as indicated by FireFox58 in his message...