Results 31 to 40 of 42
-
17th August 2014, 09:01 PM #31
what you mean with ; cannot change numbers ?
You change them in Notepad , save , reboot . Thats the only way .
edit ;
In order to exclude things , i just tried it myself on latest truck navcore
It worked exactly as expected and as instructed earlier
With changing decimals i got several millimeters offset
So in your case ; changing 932 and83 should make a noticeable different to start with
Keep in mind when testing that 83 effects left side of screen in <-> direction , 932 effect right side <-> direction
BTW
you need cal.txt including extention , calib .txt is for older navcores ( early v8 and earlier )
-
The Following 1 Users Say Thank You to basflt For This Useful Post:
- [ Click To Expand ]
-
biggerdave (17th August 2014)
-
18th August 2014, 01:20 AM #32
The only problem that can be generated, is that you can not press any button on the gps.
That is solved by removing the gps cal.txt from the pc. Turning the gps after connecting the USB cable, do not ask for confirmation of connection.
Everything you do cal.txt the gps is returnable with disposal.
-
The Following 2 Users Say Thank You to Orni For This Useful Post:
- [ Click To Expand ]
-
basflt (18th August 2014), biggerdave (18th August 2014)
-
18th August 2014, 01:25 AM #33
-
The Following 1 Users Say Thank You to basflt For This Useful Post:
- [ Click To Expand ]
-
Orni (18th August 2014)
-
18th August 2014, 01:28 AM #34
The file must be named cal.txt
You have to try various combinations until you find the right one.
It does not matter what place the black screen, you go testing, but you must have a navcore working properly on the gps.
In my forum there are users who have taken up to 5 days to calibrate gps
The display go one direction, if you press "A" which is the effect?
The display go one direction, if you press letter "Q" what is the effect?
The display go one direction, if you press "P" which is the effect?
The display go one direction, if you press "L" which is the effect?
-
The Following 1 Users Say Thank You to Orni For This Useful Post:
- [ Click To Expand ]
-
biggerdave (18th August 2014)
-
18th August 2014, 10:23 PM #35
Yes it does !
1 its a starting-point (it prevents you from spending 5 days !!!!!! )
2 when saved or written down you can revert back to it .
Just keep in mind that it is inverted
AAA BBB CCC DDD on black screen means ; BBB AAA DDD CCC in cal.txt
on my device i changed from 826 to 862 ( second set )
This moved the 1 towards the 2 on the screen
That means that edzha90 would need to lower the value of his original ( first two ) sets to get what he wants
-
The Following 1 Users Say Thank You to basflt For This Useful Post:
- [ Click To Expand ]
-
jarkita (19th August 2014)
-
18th August 2014, 11:47 PM #36Tomtom Master
Supporter
Has any one tried using a DSA Navcore to calibrate their screen when the have got a problem like edzha90 ?
With a DSA Navcore if the file pointercal does not exist when you go into the skin chooser you need to use a stylus to calibrate the device !
-
19th August 2014, 01:36 AM #37
For example, the coordinates are a One firts edition, drawing is only a guide, not match the square screen
The calibration of DSA is only for the application "skinchooser" does not change anything on the screen of the GPS.
-
The Following 2 Users Say Thank You to Orni For This Useful Post:
- [ Click To Expand ]
-
biggerdave (19th August 2014), jarkita (19th August 2014)
-
3rd November 2014, 06:39 PM #38
Cheers guys, it seems easiest way will be to replace the screen, any ideas what exactly I need :
LED Screen & Touch Digitizer
or only
Digitizer Glass ?
I will following this guide to replace screen - any other tutorials which you would suggest ?
-
3rd November 2014, 06:54 PM #39
-
4th November 2014, 03:26 AM #40
Thanks, I asked what exactly I need as on ebay 'LED Screen & Touch Digitizer' is more expensive than Digitizer Glass..
I assume I need Digitizer Glass only ?
iGO R3 HERE EUROPE 2023.Q4
Thnx, does anyone know something for 2024 maps?