Results 1 to 6 of 6
-
22nd October 2019, 04:47 PM #1
PSA_ovip-int-firmware-version_21-08-22-32_NAC-r1_NAC_EUR_WAVE2
YOUR TOUCHSCREEN NAVIGATION SYSTEM UPDATE
Step 1 : Prepare your USB stick
Make sure you have an empty USB stick with a minimum 32GB capacity that is formatted to FAT32. (Some updates may only need a 16GB USB stick capacity)
Reset your USB stick before you download any update.
Step 2 : Licence download
1. Create a "Licence" folder within your USB stick.
2. Download your licence.
3. Copy the licence into the "Licence" folder within your USB stick.
Download Software (2.5GB)
Step 4 : Extract the file and copy it to your USB stick.
Step 5 : Plug your USB stick into the USB port within your vehicle
In order to go through the in car steps, please download the PDF below. You can then choose to send it to your smartphone or print it.
Important information:
- You need to have your engine running throughout all of the updates.
- It is advised to avoid driving during the updates.
- Deactivate the "Stop & Start" function in order to avoid standby mode, especially if you're not driving.
- Never remove the USB stick from its port before the end of the update process.
imlost Reviewed by imlost on . PSA_ovip-int-firmware-version_21-08-22-32_NAC-r1_NAC_EUR_WAVE2 YOUR TOUCHSCREEN NAVIGATION SYSTEM UPDATE Step 1 : Prepare your USB stick Make sure you have an empty USB stick with a minimum 32GB capacity that is formatted to FAT32. (Some updates may only need a 16GB USB stick capacity) Reset your USB stick before you download any update. Step 2 : Licence download 1. Create a "Licence" folder within your USB stick. Rating: 5
-
The Following 2 Users Say Thank You to imlost For This Useful Post:
- [ Click To Expand ]
-
maxbullett (30th October 2019), nona krimit (23rd January 2020)
-
22nd October 2019, 06:23 PM #2
@imlost
Should the license file be the eprsonal license file downlaoded by PSA, or the file that you posted is universal?
If the file should be the unqiue personal license file plese highlight this issue.
-
22nd October 2019, 06:52 PM #3
It don't matter which you use but should anyone wish to have an individual licence they can always visit
and input their personal details. Any connect nav owners that are still eligible for updates would probably just use my post as a 'heads up' regarding an update being available.
-
26th October 2019, 01:48 PM #4
@imlost
For that I beleive that you should replace the first link (license) with link of web site where anyone can download the personal license.
Because the update start ONLY if the license file in the foleder match the hardware ID of the system (that is different for each system).
Then propose to download your license could be not ok for other system than yours.
-
26th October 2019, 03:17 PM #5
On your first point - Please re read the posts and you will see that I have replied already with a link to the web page.
On your 2nd point - How do you you know? Have you tried?
Over 16 months I have already installed this on 5 other ConnectNav systems with no problems, further I have already made previous posts with the same information with no reported problems by forum members.
Please try yourself before making needless suggestions or planting doubt in the minds of others, I would never post unless I had already tried myself.
-
8th January 2020, 04:23 AM #6
Hi, one question, will this update work for a Peugeot 208 1.2 turbo 2018 Allure (im from Spain)? Im on version 21.06.47.34_NAC-r0, so im about to update to 21-07-67-32_NAC-r0_NAC_EUR_WAVE2, but if the update of this thread works for me then i will do it and avoid the 21.07... Thanks in advance!
Becker Map Pilot Europe 2023 v23
Torrent link doesn't work