Results 1 to 10 of 11
-
29th December 2022, 02:49 PM #1
Becker M013 Map Pilot Issues
Good morning,
Thank you for accepting me into the group.
As per the title, I am having some issues with my Map Pilot system. I have email Becker, but I don't have much hope they will offer me much support.
This relates to a new (to me) 2012 C Class Mercedes
To summarise:
• The unit previously would not initiate in the car
• I have since connected it to Content Manager
• I have now uploaded the latest software to it and the European maps I purchased from Becker last night
• The car now recognises the Map Pilot Unit and maps
• However, there is very limited storage space on the unit’s flash drive, so I can only install Great Britain maps
• The unit’s flash drive is just over 7 gig in size, and now only has 564 meg left, so I cannot install France, as an example
• According to Content Manager, the software and maps only use about 30% of the drive, with the remainder being “other” (is this firmware?)
• I have put in a blank formatted (FAT32) SD card, but it is not recognised by Content Manager to transfer any content to.
• Content Manager will not let me back up my data, saying “Media is of improper type”
Perhaps I am asking too much, but I would have thought, at least I could back up my data.
Many thanks.DropThePuck Reviewed by DropThePuck on . Becker M013 Map Pilot Issues Good morning, Thank you for accepting me into the group. As per the title, I am having some issues with my Map Pilot system. I have email Becker, but I don't have much hope they will offer me much support. This relates to a new (to me) 2012 C Class Mercedes To summarise: Rating: 5
-
29th December 2022, 06:56 PM #2
Salut Dropthepuck : Hello download my file it is version V22.1 as you bought.
Once downloaded, decompressed the file, it will ask you for a password: Gla200. (Don't forget the period), then go to the M013 folder, select APD, Manual, Mapregionspsf50, Navi, Autorun and place in an SD card.
Connect your becker box and format the Becker MP partition in FAT32, go back to the M013 folder that you will have downloaded, it must remain device.xmlt, device.xml and device.sig takes 3 files and places it in the becker MP partition . eject your becker device, unplug your box and place your sd card in the becker box. then you can go connect your box in the car.
let me know
-
29th December 2022, 06:57 PM #3
Salut Dropthepuck : Hello download my file it is version V22.1 as you bought.
Once downloaded, decompressed the file, it will ask you for a password: Gla200. (Don't forget the period), then go to the M013 folder, select APD, Manual, Mapregionspsf50, Navi, Autorun and place in an SD card.
Connect your becker box and format the Becker MP partition in FAT32, go back to the M013 folder that you will have downloaded, it must remain device.xmlt, device.xml and device.sig takes 3 files and places it in the becker MP partition . eject your becker device, unplug your box and place your sd card in the becker box. then you can go connect your box in the car.
let me know
-
The Following 1 Users Say Thank You to fred1 For This Useful Post:
- [ Click To Expand ]
-
outubro (9th March 2023)
-
29th December 2022, 08:05 PM #4
Sorry. I might be really stupid, but what does this do? Does it just replace the maps that I bought? What about the software and firmware on my MP unit? Won't they be deleted once I format, and then not work? Thanks - just a bit confused and don't want to mess it up.
-
29th December 2022, 10:24 PM #5
No you risk nothing: everything is included in the europe map files 2022-2023 firmware, risk areas, sigh pro tunnel etc...
-
30th December 2022, 12:10 AM #6
OK. I will have a go. Thanks, again.
-
30th December 2022, 01:22 AM #7
-
30th December 2022, 01:46 AM #8
It says "Map has been installed without unlock code". Then, "no unlock code available".
Both device files are set to read only.
I have played around with file settings, permissions, etc. It looks like it is working. Many thanks.Last edited by DropThePuck; 30th December 2022 at 12:40 PM.
-
30th December 2022, 03:51 PM #9
Bonjour
Ok super !!!
-
9th March 2023, 02:41 AM #10
goodnight,
you can activate the linkhttps://mega.nz/file/eMU1EA6T#HwH4V2...lK0JvRVZK-g8B4 I have my M013 with problems,
thank you for your helpLast edited by outubro; 9th March 2023 at 06:14 AM.
iGO R3 HERE EUROPE 2023.Q4
gracias por compartir