Results 1 to 10 of 55
-
14th February 2018, 02:16 AM #1
Becker MAP PILOT Europa 2018 V16.0 [Q2/2017]! Maps & Danger Spots Europe September 2017
Becker MAP PILOT Europa 2018 V16.0 (Q2/2017)! Maps and Danger Spots Europe September 2017
including Becker MAP PILOT Software + Danger Spots Europe September 2017
So this is the second time I’ve released a set of maps so please bear with me, I’ve tested on an M054 device and works but think it may also work on these models:
M054, M075, M076, M083, M084, M085, M092 & M097 but you will have to test for your self.
It does work slightly different from previous modded versions I’ve downloading in the past so read the instructions carefully.
Instructions:
1. VERY IMPROTANT… back you all the files on the root of your device before you do anything (i.e. drag and drop all the files inside “Becker MP” drive to a safe location on your computer).
2. Once the back up is complete delete all the files from the becker device and empty your trash bin
3. Extract all the .rar files make device.xmlt readonly or lock the file if using a Mac (They were readonly or locked but winrar removed this on compression.) and copy the extracted files onto the becker device without altering any other files.
4. Plug into your car and the maps should work and check the map versions in settings.
Now the problem previously came if you plug your becker back into the content manager it would not work back in your car until you copy and replace these 2 files on the becker from the download archive but this may now be fixed but post in the comments if not:
device.xml and device.xmlt Make device.xmlt readonly or lock the file if using a Mac. (They were readonly but winrar removed this on compression.)
then you can use in the car again or you can restore the device by restoring all the files you backed up earlier.
Download links
The links will take you to an advert first just wait 5 seconds and hit "skip ad" in the top right corner of the screen.
[COLOR="#0000FF"][B]So I asked people to not re-host the links but there is always 1 troll, user "aammjj" who I chatted with in private messages and he basically told me to get lost and he shared new links, which he swore was in the spirit of sharing even though he hosted on sites where he gets paid per-download.
Dont use his download links I had to fix the "No Unlock Code" issue and issue new links but seriously... SORRY GUYS THIS IS THE LAST TIME I WILL HACK AND RELEASE MAPS FOR BECKER OR ANY DEVICE AND AS ALWAYS A MINORITY SPOILS IT FOR EVERYONE ELSE IN THE COMMUNITY, but you know who to blame this time, I have also removed the adverts so you can direct download now.
If your thinking of joining RapidGator you can use this referral for money off.
If your thinking of joining Uploaded.net you can use this referral for money off.
Sorry about the ads chaps, I had to finance this from my own pocket. I'm not trying to make money but only cover costs with adfly.
And I almost forgot the archive password is bmpv16 (case sensitive). Thanks and dont forget to hit "Thanks" if it's helped you
Also thanks to testing by on his 9077 he got the version 15 to work on his 9077 (i assume also M013, M041, M045, M046, M050 und M051, but not sure).
Here is his post with the process he used for earlier becker models:
Update 2 (version 15 same procedure)...We now have 2 conformations that method works on these 2 older device models 9077 & M013 so an educated guess would be that his method for these older device will work on these models 9077, M013, M041, M045, M046, M050 and M051gavla Reviewed by gavla on . Becker MAP PILOT Europa 2018 V16.0 [Q2/2017]! Maps & Danger Spots Europe September 2017 https://i.imgur.com/p2dsWXC.jpg Becker MAP PILOT Europa 2018 V16.0 (Q2/2017)! Maps and Danger Spots Europe September 2017 including Becker MAP PILOT Software + Danger Spots Europe September 2017 So this is the second time I’ve released a set of maps so please bear with me, I’ve tested on an M054 device and works but think it may also work on these models: M054, M075, M076, M083, M084, M085, M092 & M097 but you will have to test for your self. It does work slightly different from Rating: 5
-
The Following 27 Users Say Thank You to gavla For This Useful Post:
- [ Click To Expand ]
-
anbi (14th February 2018), andreapisa (19th February 2018), anilcan1 (19th February 2018), arbase (16th June 2018), beckmap (16th February 2018), benz_dbox (14th February 2018), carlosacsimoes (6th March 2018), CarSearch24_7 (15th February 2018), charlye59 (15th March 2018), DoubleTwix (14th February 2018), edeb (27th July 2018), Eleumas (25th May 2018), eXplodeZ (20th February 2018), infang (21st June 2018), jeisseri (15th March 2018), jovacmar (12th March 2018), kenn (6th May 2018), kuwokra (15th February 2018), mzakho (26th June 2018), Nizze (14th February 2018), pdtdk (16th February 2018), s-max (28th November 2018), saja (27th March 2018), SteliosKnossos (14th February 2018), ThomasNe (29th March 2018), Toby777 (18th February 2018), tuurak (6th August 2018)
-
14th February 2018, 02:19 AM #2
-
14th February 2018, 02:02 PM #3
THX Gavla
-
14th February 2018, 02:22 PM #4
Hello. Waiting for Turkey map. Will be ?
-
14th February 2018, 05:11 PM #5
Thank you Gavla, will test it out soon
//
-
14th February 2018, 11:27 PM #6
-
The Following 4 Users Say Thank You to gavla For This Useful Post:
- [ Click To Expand ]
-
infang (21st June 2018), The Lykaner (15th February 2018), Vcrone (15th February 2018)
-
16th February 2018, 02:44 AM #7
Gavla thanks for sharing. I will keep you updated on the operation. M013.
-
16th February 2018, 03:55 PM #8
Hello everyone, then at present the browser works perfectly (I have the model M013). I had installed the V15 Q4 / 2016 and after a week I had the problem "no unlocking code available". Yesterday I updated to V16 Q2 / 2017 following these steps:
- "APD" folder copied in full;
- "MapRegionsPSF50" folder copied in full;
- "licenses" folder copied in full;
- copied the 4 files "AutoRun.exe", "device.sig", "device.xml", "device.xmlt";
- "device.xml" and "device.xmlt" assigned as "read only".
Following these steps at the moment is working.
-
The Following 4 Users Say Thank You to beckmap For This Useful Post:
- [ Click To Expand ]
-
-
16th February 2018, 06:48 PM #9
Hi beckmap, that's good news. I also have the M013 and I'll try that.
Works FINE!
-
16th February 2018, 07:33 PM #10
Let me know.
I recommend, I noticed that once you have applied the "read only" attributes to the "device.xml" and "device.xmlt" files, once you have unplugged the BMP from your computer you must connect it directly to the car. If you unlink the BMP from the computer and re-connect it, the files lose the "read-only" attribute, so you'll need to put them back to "read-only" first. Then as a last operation before disconnecting the BMP from the computer, check the "read only" attribute of the "device.xml" and "device.xmlt" files.
Universal Firmware Patcher for...
Hello, How can I get into the preboot mode on...