Results 1,131 to 1,140 of 1996
-
29th December 2020, 08:30 PM #1131
-
29th December 2020, 08:30 PM #1132
hi Firefox, just to check is it possible to patch GPSMAP 66sr latest firmware?
-
30th December 2020, 06:04 AM #1133
-
The Following 1 Users Say Thank You to OMGWTFBBQLOL For This Useful Post:
- [ Click To Expand ]
-
mathematician (30th December 2020)
-
30th December 2020, 09:50 PM #1134
As kindly request from
This is a Patched Firmware (JNX + Unlocked Maps) for eTrexTouch 25/35 (HWID = 2140) ver. 4.40
Since the eTrexTouch 25/35 (HWID: 2140) does not have the GSV and falls into category 2
MSV: Yes, GSV: ---
In this case the Patched Firmware guarantees the correct reading of Unlocked Maps, including NTU and TOPO Maps with CP 65001.
The Patched Firmware guarantees reading of BirdEyes JNX images too.
Be sure to remove All BirdEyes images eventually present on Device before apply Patch
BirdEyes images can be restored AFTER flashing new firmware
Also, in this case the "patched" Firmware can be loaded through the normal update procedure via WebUpdater
Changes made from version 4.00 to 4.40:
- Fixed possible display issue with the geocache filtering page
- Fixed navigation issue when clearing the current activity
- Fixed possible issue when navigating to a geocache
Give feedback!Last edited by FireFox58; 31st December 2020 at 03:56 AM. Reason: new attached file
-
The Following 1 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
VadimK (7th October 2022)
-
30th December 2020, 11:50 PM #1135
Hello.
is there a solution for a garmin 785 dēzlCam 785?
Thank you
<Model>
<PartNumber>006-B2911-00</PartNumber>
<SoftwareVersion>550</SoftwareVersion>
<Description>dezlCam</Description>
</Model>
Garmin dezl 785 uses android as its operating system. so you can install any android application like on a tablet.Last edited by yopy; 1st January 2021 at 10:52 PM. Reason: add information in spoiler
-
31st December 2020, 12:56 AM #1136
Dont work fine....I have got a garmin ETREX touch 35, can you help me to put a maps?
If it can be from Spain and surroundings, it would be appreciated, and tell me how to install it .... I have tried to put one downloaded from this forum, a topo, and it tells me when I start the gps that the maps cannot be authenticated ...
I updated with garmin express and it has given me some maps, but when looking for an address I cannot find Spain ...
Any ideas?Last edited by Garmin_Nuvi; 31st December 2020 at 02:50 AM.
I sell and update cards with personalized CID, for more information, contact me by private message, respond in less than 24 hours
-
31st December 2020, 03:57 AM #1137
-
The Following 1 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
Garmin_Nuvi (31st December 2020)
-
31st December 2020, 03:59 AM #1138
Your device will have to be patched to use unlocked maps
These devices came with in two parts, make sure both are selected
D6185090A(TopoActive 2020.20, South West)
gmapprom(TopoActive 2020.20, North East)Unless you are a "New" member, having used the Thanks button regularly is the quickest way to get help.
-
31st December 2020, 04:54 PM #1139
Last edited by Garmin_Nuvi; 2nd January 2021 at 02:52 AM. Reason: Translated,added link to maps requested
I sell and update cards with personalized CID, for more information, contact me by private message, respond in less than 24 hours
-
2nd January 2021, 02:28 AM #1140
Hi guys, I'm looking for a way to install JNX maps in my GPSMAP64s.
I've tried with JNX loader patcher (ver3.8) (firmwarepatcher) but when I select the patched .cgd file it does't work ("Pattern not found" error).
My garmin:
<PartNumber>006-B1859-00
<SoftwareVersion>560
<Description>GPSMAP 64s
Can you please help me?
Thank you very much!
Moderator Notice :
Last edited by Garmin_Nuvi; 2nd January 2021 at 09:04 AM.
Renault Carminat [NO LIVE] Tomtom...
Renault Carminat (NO LIVE) Tomtom Europe 11.30...