Results 981 to 990 of 2030
-
6th August 2020, 08:11 PM #981
Do I need to unlock Nuvi 52 LM?
-
6th August 2020, 11:22 PM #982
-
The Following 1 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
nikica (8th August 2020)
-
7th August 2020, 02:34 PM #983
Confirming RV770 patches and works fine with the Hema 72K Topo, Hema 150k from RV775, as well the traditional Hema 4WD maps if you have the ability to convert the other formats to JNX.
You can also layer in anything else, for example I also have a huge statewide 25K topo set in JNX as well as various historical and other map sets in the mix. The trick is configuring the correct scaling for each set/theme for seamless zooming, and also assigning appropriate product ID's to each set in your collection to enable individual map selection in the device.
Takes a bit of planning, I found JNX customiser is the best tool for this but you will need to work on the language translation and there is some learning. It allows plenty of flexibility to edit the ini file to include product ID and zoom customisations and has a great batch mode for large sets. The RV770 is also happy trawling subfolders in Birdseye, doing so makes it easier to manage large collections.
The RV770 is not limited to 32gb microSD like many other devices, to accommodate my collection on the one card I have a 128GB formatted FAT32 that works fine. After formatting a larger card the RV770 will want to see a card specific \JOURNAL\JEFF.BIN, if not present it will initialise the card to add one in and you will lose any maps on it so do that first before you copy any data onto it.
Global Mapper is good for JNX conversions and it's possible to patch it to include your own custom product ID's to make it easier.
The catch is you will have to do your first patch in pre-boot mode with a .rgn file not the .gcd. Read up on this very well and be very careful!
Otherwise all of this has all been working great for me for the last 18 months.Last edited by Bushwalker8; 7th August 2020 at 03:47 PM.
-
The Following 1 Users Say Thank You to Bushwalker8 For This Useful Post:
- [ Click To Expand ]
-
Garmin_Nuvi (7th August 2020)
-
7th August 2020, 02:55 PM #984
RV775 is essentially same board as the RV770 with HWID 2684, the difference with RV775 is extra memory (8gb vs 4gb ) to accommodate the onboard Topo 150K.
The GarminDevice.xml in RV775 is a little misleading, the Hema 150k is all jnx in the Birdseye folder, and the two small .img files System/Map are actually Foursquare & Parkopedia.Last edited by Bushwalker8; 7th August 2020 at 03:31 PM.
-
The Following 1 Users Say Thank You to Bushwalker8 For This Useful Post:
- [ Click To Expand ]
-
Garmin_Nuvi (8th August 2020)
-
8th August 2020, 06:18 AM #985
As Bushwalker8 says I can confirm the RV770 works well with with all JNX files. I patched the GCD that Garmin_Nuvi provided and used webupdater and now I'm rocking with the Hema 72K maps and high detail sat maps downloaded from birdseye. The latest version of JNX customizer can be installed with English language.
Last edited by iratepirate; 8th August 2020 at 06:47 AM.
-
The Following 1 Users Say Thank You to iratepirate For This Useful Post:
- [ Click To Expand ]
-
Garmin_Nuvi (8th August 2020)
-
8th August 2020, 09:08 AM #986
JNX customizer can install English but the available instructions for advanced features are in Spanish, check your PM.
-
8th August 2020, 05:13 PM #987
So, I'm having some issues. I'm supposed to open the gupdate.gcd file in the firmware patcher right, but I can't figure out where the gupdate.gcd file is. I looked in the system folder but it's not there.
I updated the Garmin again hoping that it will show up in the system folder of my Garmin but it's not there. Any suggestions?
-
The Following 1 Users Say Thank You to 2damax For This Useful Post:
- [ Click To Expand ]
-
galjoca (9th August 2020)
-
9th August 2020, 03:21 AM #988
The Patch Kit is the easiest to use, try first
Patch Kit by FireFox58 for HWID 1947 Only
Nuvi 25x9 C4 (1947) fw8.80.rar
Make sure your device is fully charged.
Unpack contents to fresh SD card formatted FAT32
Ensure your device is fully OFF (not in standby), insert the card in device and power on.
"Loader" will appear on screen for a while then the device will boot up when the flash of patched firmware is complete.
Your device may reboot its self during the process just be patient.
Your SD card will have a new file named 154.bin this is a backup of the device's non-volatile memory region and may save your device later if needed,so keep a copy of it somewhere safe.
Last edited by Garmin_Nuvi; 21st December 2021 at 01:12 PM.
-
The Following 1 Users Say Thank You to Garmin_Nuvi For This Useful Post:
- [ Click To Expand ]
-
testfordownload (8th August 2022)
-
11th August 2020, 09:29 AM #989
Request for a MAP & JNX patched firmware for Astro 320 Dog Tracker - latest firmware version is 4.60
<PartNumber>006-B1339-00</PartNumber>
<SoftwareVersion>350</SoftwareVersion>
<Description>Astro 320</Description>
With thanks for all the hard work of MODS and patchers! I've asked for so many firmwares and I promise this will be my last one I'll learn how to do it myself from now on...
Edit:- Did it for myself - thanks mods for all your help as I learnt about Garmin devices over these last couple of weeks!!Last edited by iratepirate; 11th August 2020 at 10:25 AM.
-
The Following 1 Users Say Thank You to iratepirate For This Useful Post:
- [ Click To Expand ]
-
Garmin_Nuvi (11th August 2020)
-
12th August 2020, 06:34 PM #990
My Oregon 700 worked well with CN_EU_2020.1, unlocked and changed the LBL codepage in 1252 with ImgTool.
With CN_EU2021.1 I can unlock it and even change the LBL code.
But it doesn’t work.
In ImageTool I see one difference in both maps, 2020.1 Signed says ‘No’ and 2021.1 Signed says ‘TRE’
Is there a patche to solve this problem??
My Device:
<PartNumber>006-B2512-00</PartNumber>
<SoftwareVersion>500</SoftwareVersion>
<Description>Oregon 700</Description>
Greetings to all
iGO HERE EUROPE 2024.Q2
Me falta el codigo para extraer el archivo. Mapa...