Results 131 to 140 of 2029
-
2nd October 2018, 06:19 AM #131
Would it be possible to get one for this device?
<PartNumber>006-B2237-00</PartNumber>
<SoftwareVersion>400</SoftwareVersion>
<Description>RV 660</Description>
-
6th October 2018, 04:30 PM #132
This is a custom SD flash kit only for HWID 2237 devices (Camper RV600)
Instructions: As above post ...
Camper RV600 (2237) fw4.00.rar:
-
24th October 2018, 03:32 AM #133
Hi.
For me the operation (loader) took some 15-20 minutes on the Drive 40. I was waiting patiently, being a bit afraid of the result. Finally it works fine. Many thanks for sharing the solution. Great job.
-
24th October 2018, 02:52 PM #134
Maybe a lame question but do we leave these files on the sd card after successful firmware downgrade
Thanks
-
24th October 2018, 05:15 PM #135
-
The Following 1 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
speccy (25th October 2018)
-
28th October 2018, 06:49 PM #136
Hi,
I got a garmin echoMAP chirp 54cv with 4.20 software version (latest version available). Which is the best option to get the maps (locked or unlocked)?
Thx
-
30th October 2018, 01:33 PM #137
As a kindly request by @
This is a Patched Firmware for Oregon 700 ver. 4.20
Since the Oregon 7xx (HWID: 2512) does not have the GSV and falls into category 2
MSV: Yes, GSV: ---
In this case the Patched Firmware guarantees the correct reading of Unlocked Maps, including NTU and TOPO Maps with CP 65001.
Also, in this case the "patched" Firmware can be loaded through the normal update procedure via WebUpdater
-
The Following 2 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
-
31st October 2018, 12:02 AM #138
Thank you very much, FireFox58! All is works good on my Oregon 700.
-
2nd November 2018, 01:51 PM #139
Dear vladan091, FireFox58 and the rest contributors,
Thank you for the knowledge and information provided!
I managed to activate a Garmin Nuvi 2597LM:
<PartNumber>006-B2077-00<
<SoftwareVersion>880<
<Description>nüvi 2597<
With the 770 firmware it arrived and respective nuvi2xx7and2xx8C4_770.gcd
the updater.exe crashed both on WinXP3 and Win7.
And now the device is free from that joke Garmin Express
Kind regards,
MN
-
2nd November 2018, 09:26 PM #140
That Device doesn't recognize any Unlocked Map unless you Patch the Firmware ...
This is a custom SD flash kit only for HWID 2077 devices (nüvi 2597 C4), firmware version 8.80
Instructions:
- Download the RAR file from the Link attached then extract directly to a clean microSD formatted in FAT32 (best using WinRar to extract).
- If your device has a Firmware version lower than 8.80 all is okay, otherwise a firmware downgrade is advisable, although it should not be necessary because I forced a firmware version of 8.81
Anyway, you can download an older firmware release from here: - Ensure the device is fully OFF (not in standby), insert the card in device and power on.
- "Loader" will appear on screen for some time and the device will boot up when the flash of patched firmware is complete.
The device can reboot itsself during the process. - After the Patch is applied the device will be able to read Unlocked Maps.
- When the flash has completed remove the card, in its root will be a new file named 154.bin.
That's a backup of the device's non-volatile memory region and may save your device at a later date.
You would be best to keep a copy of it somewhere safe for as long as you have the device. - In case of flashing of a new version of the Original Firmware the Patch must be repeated, so you have not run Garmin Express with device connected as the software update first Firmware Device if any available. Do one of the following alternative ways:
Methode 1 (with device NOT connected)
- Get file GarminDevice.xml from your Device (you find it in folder \Garmin)
- Put the file in a Removable device, as an SD Memory or an USB stick (8 or 16 GB) in folder \Garmin
- Run Garmin Express, your Device will be recognized as well
- Do all the Update you want (when GE ask you to reboot device, simply secure remove your memory from PC and reinsert again)
- When Update finishes you will have ALL the files you need in the memory, simply move them into device.
- Using this Tip you have all the vantages of Garmin Express, without any problem of bricking, and you leave the Firmware release untouched
Methode 2 (with device USB connected)
- With the device connected GE copy new Firmware Update (if any available) into device and ask for reboot
- Do not remove the device (this is very important) but move GUPDATE.GCD in your PC (you find it in folder \.System)
- Patch your Firmware using Firmware Patcher. You get a file renamed as GUPDATE_Patched.GCD
This file must be renamed as GUPDATE.GCD and copied onto device overwriting the existing one - Now you can surely reboot your device. The Firmware loaded will be patched as well
Nuvi 2xx7-2xx8 C4 (2077) fw8.80.rar
Last edited by FireFox58; 25th April 2019 at 08:02 PM. Reason: Link renewed
-
The Following 11 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
cfphoenix (20th April 2020), faroukmaj (29th December 2020), hollzer (15th July 2019), jasonmotec (10th January 2019), neduet2000 (12th July 2019), nenadscorpion (31st October 2019), RingoTB (6th September 2019), tomojure (28th December 2018), vitalten (28th October 2021), XisiX (3rd August 2019), yopy (20th September 2023)
Garmin City Navigator Europe NTU...
Welcome to the forum. Your device uses these NTU...