Results 1 to 10 of 11
-
12th October 2019, 04:40 PM #1
Ford Sync3 8/16/32/64GB to Europe tutorial - Maps, Soft
What's the problem?
US navs have less space than EU versions of the same so you're not able to install EU maps without this hack.
What you need:
1. 32GB pendrive
2. Notepad ++
3. UCDS or ELM327 (with HS, MS, MM can support - most of them based on STN chipset)
4. ForScan (with extended license - free for 2 months) - available at
Required files:
Sync 3.3 update:
Sync 3.3 Voice:
Voice Nav files:
Gracenotes:
Maps (F8 - 2019):
Map license (for F8 - 2019):
Dab files:
Pendrive preparation tutorial:
1. Format pendrive as FAT32
2. Download all above files
3. Create empty directory in pendrive called "SyncMyRide" without quotes
4. Place all above files in "SyncMyRide" directory (do not unpack or rename them!)
5. Add file attached to this post to "SyncMyRide" directory (do not unpack or rename!)
6. In main root at pendrive create file called "autoinstall.lst" and edit it in notepad - paste below content into this file:
7. In main root at pendrive create second file called "reformat.lst" and edit in notepad++ - paste below content into this file:
FOR 64GB version:
FOR 8/16GB (non-nav) versions:
Car tutorial:
1. Connect with ForScan - go to module programming and backup "APIM" module configuration to file
2. Start engine ON and connect Pendrive, wait for update - press break pedal every 10 minutes to not power-off nav
3. After update complete (green screen) disconnect pendrive
4. Wait for nav system load, master-reset it two times !! and move key to ACC OFF, start engine again, wait for nav to load and hard reset nav system two times by pressing seek right + power
5. Connect with Forscan - go to module programming and load configuration from backup - sometimes this step is not required - depends on car - if you have UCDS you can do this by importing config by car VIN without any backups.
Additional info:
1. APIM module contains country code, so you can change car region by updating hex code:
7D0-02-01 **** xxxx xxxx
in place of **** paste country code ASCII to HEX ( )
example:
PL - 50 4C
DE - 44 45
US - 55 53
CA - 43 41
etc.
2. 32GB isn't able to contain all files from 64GB version so in reformat LST you need delete some lines like: GRACENOTE, Unneded VOICE files (leave only your language), some maps where you're not going to go.
3. Nav voices
A - DUN, ENG, FR, DE
B - IT, PT, SP, TR
C - CZ, PL, RU
D - DUN, FIN, NOR, SW
4. Map content
A - COMMON - ALWAYS REQUIRED!
B - EXT - ALWAYS REQUIRED!
C - North UK - Dania, Finlandia, Wielka Brytania, Irlandia, Man, Islandia, Norwegia, Szwecja
D - Iberia - Hiszpania, Gibraltar, Portugalia
E - France - Andora, Szwajcaria, Francja, Monaco
F - Central - Austria, Belgia, Czechy, Niemcy, Liechtenstein, Luksemburg, Holandia, Polska, Słowacja
G - EU South - Albania, Bośnia i Hercegowina, Grecja, Chorwacja, Węgry, Włochy, Czarnogóra, Macedonia, Malta, Serbia, Słowenia, San Marino, Turcja, Watykan
H - EU East - Bułgaria, Białoruś, Estonia, Kazachstan, Litwa, Łotwa, Mołdawia, Rumunia, Rosja, Ukraina
J - EU Cyprus - BS?, CU?, Cypr, NC?
5. Example reformat.lst for Polish language and maps for 32GB version:
KacperA Reviewed by KacperA on . Ford Sync3 8/16/32/64GB to Europe tutorial - Maps, Soft What's the problem? US navs have less space than EU versions of the same so you're not able to install EU maps without this hack. What you need: 1. 32GB pendrive 2. Notepad ++ 3. UCDS or ELM327 (with HS, MS, MM can support - most of them based on STN chipset) 4. ForScan (with extended license - free for 2 months) - available at What's new (https://forscan.org) Required files: Rating: 5Last edited by pe1agp; 12th October 2019 at 08:45 PM.
-
The Following 4 Users Say Thank You to KacperA For This Useful Post:
- [ Click To Expand ]
-
bodoque (23rd January 2021), damascus7 (16th December 2020), deirosjuan (3rd January 2020), edgaropoland (21st October 2019)
-
21st October 2019, 08:47 PM #2
Are these files for the new version of Sync 3 (3.3 and newer from 2018. 2019) or for everyone?
-
9th November 2019, 04:25 PM #3
-
The Following 1 Users Say Thank You to KacperA For This Useful Post:
- [ Click To Expand ]
-
bodoque (24th January 2021)
-
8th December 2019, 06:07 PM #4
Hello!
It works on Ford fiesta?
thanks
-
26th December 2019, 01:46 AM #5
Hi. The links above don't work. Request for new, working links.
-
28th December 2019, 01:19 PM #6
Witam.
Może ktoś ma aktualne linki?
dzięki
WARNING Only English allowed
You run the risk of a ban
Hello.
Maybe someone has current links?
thanksLast edited by pe1agp; 28th December 2019 at 02:32 PM. Reason: Warning
-
The Following 1 Users Say Thank You to jakraw22 For This Useful Post:
- [ Click To Expand ]
-
pe1agp (28th December 2019)
-
30th December 2019, 12:46 PM #7
-
11th September 2020, 04:58 PM #8
Hi, After installation every time I turn on Navi, shows pop up window with INSTALTION IN PROGRESS and I need to close it. What i did wrong ?
-
8th December 2020, 02:22 AM #9
Could you please do this guide for F9 maps? I am new to Sync 3 and want to install EU (well as many items from it) on US APIM. I have no conclusion regarding which files contain which maps and which voices . So, I do not know which files to remove.
map files are like 1U5T-14G421-BJG.tar, 1U5T-14G421-BHG.tar etc
voice files are like 4U5T-14G422-BDE.tar, 4U5T-14G422-BCE.tar etc
Do the letters in the middle of the last three letters (eg H for 1U5T-14G421-BHG.tar correspond to the following ?
For map files:
C - North UK - Dania, Finlandia, Wielka Brytania, Irlandia, Man, Islandia, Norwegia, Szwecja
D - Iberia - Hiszpania, Gibraltar, Portugalia
E - France - Andora, Szwajcaria, Francja, Monaco
F - Central - Austria, Belgia, Czechy, Niemcy, Liechtenstein, Luksemburg, Holandia, Polska, S‚owacja
G - EU South - Albania, Bo›nia i Hercegowina, Grecja, Chorwacja, W™gry, W‚ochy, Czarnogóra, Macedonia, Malta, Serbia, S‚owenia, San Marino, Turcja, Watykan
H - EU East - Bu‚garia, Bia‚oru›, Estonia, Kazachstan, Litwa, Łotwa, Mo‚dawia, Rumunia, Rosja, Ukraina
J - EU Cyprus - BS?, CU?, Cypr, NC?
for voice files (eg : D for 4U5T-14G422-BDE.tar):
A - DUN, ENG, FR, DE
B - IT, PT, SP, TR
C - CZ, PL, RU
D - DUN, FIN, NOR, SW
Are 1U5T-14G421-BAG.tar and 1U5T-14G421-BBG.tar the A - common and B - EXT required?
What size should the file SyncMyRide folder be to be able to install on 32GB? The .gz files are extracted on Sync3 installation so the final size on Sync 3 disk is going to be much bigger?
Last edited by arismfg; 8th December 2020 at 03:06 AM.
-
3rd January 2021, 10:51 PM #10
Hi,
I have a 2020 Ford Fusion US, and I’m currently running Sync 3.4 version 20136 with NAV.
I want to change the region to EU. Here is autoinstall for upgrade to 3.4.20282:
; Autoinstall Mode - Sync 3.4.20282 EU
[SYNCGen3.0_ALL_PRODUCT]
Item1 = APPS - 5U5T-14G381-EK_1606255141000.TAR.GZ
Open1 = SyncMyRide\5U5T-14G381-EK_1606255141000.TAR.GZ
Item2 = VOICE - 5U5T-14G391-AM_1598633466000.TAR.GZ
Open2 = SyncMyRide\5U5T-14G391-AM_1598633466000.TAR.GZ
Item3 = ENH_DAB - 1U5T-14G658-AF_1598633324000.TAR.GZ
Open3 = SyncMyRide\1U5T-14G658-AF_1598633324000.TAR.GZ
Item4 = GRACENOTES - 4U5T-14G423-AB_1598633764000.TAR.GZ
Open4 = SyncMyRide\4U5T-14G423-AB_1598633764000.TAR.GZ
Options = AutoInstall
How can I update maps from NA to EU without reformat? Will this autoinstall be correct? :
[SYNCGen3.0_3.4.20282_PRODUCT]
Item1 = cert
Open1 = SyncMyRide\1U5T-14G424-BJ_1591719092000.TAR.GZ
Item2 = MAP_EU
Open2 = SyncMyRide\1U5T-14G421-BAG_1591726015000.TAR.GZ
Item3 = EU_Central
Open3 = SyncMyRide\1U5T-14G421-BFG_1591727753000.TAR.GZ
Item4 = EU_East
Open4 = SyncMyRide\1U5T-14G421-BHG_1591728542000.TAR.GZ
Options = AutoInstall
[SYNCGen3.0_3.4.20282]
Item1 = EU_MAP_EXT
Open1 = SyncMyRide\1U5T-14G421-BBG_1591726765000.TAR.GZ
Item2 = VOICE_EU_PL_8
Open2 = SyncMyRide\4U5T-14G422-BCE_1580861916000.TAR.GZ
Options = Delay,Include,Transaction
Thanks.
-
The Following 1 Users Say Thank You to cody-25 For This Useful Post:
- [ Click To Expand ]
-
deirosjuan (27th March 2021)
City Navigator North America NT...
thank you, I will patiently wait for 3d map for...